Re: [PATCH v5 2/3] spi: spi-altera-dfl: support n5010 feature revision

[Tom Rix]

On 7/16/21 6:54 AM, Martin Hundebøll wrote:
> From: Martin Hundebøll <mhu@xxxxxxxxxx>
>
> The Max10 BMC on the Silicom n5010 PAC is slightly different than the
> existing BMCs, so use a dedicated feature revision detect it.
>
> Signed-off-by: Martin Hundebøll <mhu@xxxxxxxxxx>
> Reviewed-by: Moritz Fischer <mdf@xxxxxxxxxx>
> ---
>
> Changes since v4:
>   * Moved spi board_info structure from global/static scope
>     to function/stack scope
>
> Changes since v3:
>   * Changed "BMC's" to "BMCs"
>   * Added Moritz' Reviewed-by
>
> Changes since v2:
>   * None
>
> Changes since v1:
>   * use feature revision from struct dfl_device instead of reading it
>     from io-mem
>
>   drivers/spi/spi-altera-dfl.c | 21 ++++++++++++---------
>   1 file changed, 12 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/spi/spi-altera-dfl.c b/drivers/spi/spi-altera-dfl.c
> index 39a3e1a032e0..44fc9ee13fc7 100644
> --- a/drivers/spi/spi-altera-dfl.c
> +++ b/drivers/spi/spi-altera-dfl.c
> @@ -104,13 +104,6 @@ static const struct regmap_config indirect_regbus_cfg = {
>   	.reg_read = indirect_bus_reg_read,
>   };
>   
> -static struct spi_board_info m10_bmc_info = {
> -	.modalias = "m10-d5005",
> -	.max_speed_hz = 12500000,
> -	.bus_num = 0,
> -	.chip_select = 0,
> -};
> -
>   static void config_spi_master(void __iomem *base, struct spi_master *master)
>   {
>   	u64 v;
> @@ -130,6 +123,7 @@ static void config_spi_master(void __iomem *base, struct spi_master *master)
>   
>   static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
>   {
> +	struct spi_board_info board_info = { 0 };
>   	struct device *dev = &dfl_dev->dev;
>   	struct spi_master *master;
>   	struct altera_spi *hw;
> @@ -170,9 +164,18 @@ static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
>   		goto exit;
>   	}
>   
> -	if (!spi_new_device(master,  &m10_bmc_info)) {
> +	if (dfl_dev->revision == FME_FEATURE_REV_MAX10_SPI_N5010)
> +		strscpy(board_info.modalias, "m10-n5010", SPI_NAME_SIZE);
> +	else
> +		strscpy(board_info.modalias, "m10-d5005", SPI_NAME_SIZE);
> +
> +	board_info.max_speed_hz = 12500000;
> +	board_info.bus_num = 0;
> +	board_info.chip_select = 0;
> +
> +	if (!spi_new_device(master, &board_info)) {
>   		dev_err(dev, "%s failed to create SPI device: %s\n",
> -			__func__, m10_bmc_info.modalias);
> +			__func__, board_info.modalias);
>   	}
>   

Looks good to me.

Reviewed-by: Tom Rix <trix@xxxxxxxxxx>

>   	return 0;