[PATCH v5 2/5] dt-bindings: PCI: add snps,dw-pcie-ep.yaml

[Mauro Carvalho Chehab]

Currently, the designware schema is defined on a text file:
	designware-pcie.txt

It contains two separate schemas on it:

- snps,dw-pcie
  This one uses the pci-bus.yaml schema;
- snps,dw-pcie-ep
  This one uses the pci-ep.yaml schema.

As the:
	AllOf:
	  - $ref: <foo>

for the endpoint part is different than the PCI one, place
it on a separate yaml file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
 .../bindings/pci/snps,dw-pcie-ep.yaml         | 90 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 91 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml

diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
new file mode 100644
index 000000000000..b5935b1b153f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe endpoint interface
+
+maintainers:
+  - Jingoo Han <jingoohan1@xxxxxxxxx>
+  - Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
+
+description: |
+  Synopsys DesignWare PCIe host controller endpoint
+
+allOf:
+  - $ref: /schemas/pci/pci-ep.yaml#
+
+properties:
+  compatible:
+    anyOf:
+      - {}
+      - const: snps,dw-pcie-ep
+
+  reg:
+    description: |
+      It should contain Data Bus Interface (dbi) and config registers for all
+      versions.
+      For designware core version >= 4.80, it may contain ATU address space.
+    minItems: 2
+    maxItems: 4
+
+  reg-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl]
+
+  reset-gpio:
+    description: GPIO pin number of PERST# signal
+    maxItems: 1
+    deprecated: true
+
+  reset-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  snps,enable-cdm-check:
+    type: boolean
+    description: |
+      This is a boolean property and if present enables
+      automatic checking of CDM (Configuration Dependent Module) registers
+      for data corruption. CDM registers include standard PCIe configuration
+      space registers, Port Logic registers, DMA and iATU (internal Address
+      Translation Unit) registers.
+
+  num-ib-windows:
+    description: number of inbound address translation windows
+    maxItems: 1
+    deprecated: true
+
+  num-ob-windows:
+    description: number of outbound address translation windows
+    maxItems: 1
+    deprecated: true
+
+  max-functions:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum number of functions that can be configured
+
+required:
+  - reg
+  - reg-names
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      pcie-ep@dfd00000 {
+        compatible = "snps,dw-pcie-ep";
+        reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
+              <0xdfc01000 0x0001000>, /* IP registers 2 */
+              <0xd0000000 0x2000000>; /* Configuration space */
+        reg-names = "dbi", "dbi2", "addr_space";
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index c88f6cb37e47..5818733eace7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14307,6 +14307,7 @@ L:	linux-pci@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/designware-pcie.txt
 F:	Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
+F:	Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
 F:	drivers/pci/controller/dwc/*designware*
 
 PCI DRIVER FOR TI DRA7XX/J721E
-- 
2.31.1