Re: [PATCH v2 2/2] phy: amlogic: Add a new driver for the HDMI TX PHY on Meson8/8b/8m2

[Vinod Koul]

On 29-06-21, 20:20, Martin Blumenstingl wrote:
> Amlogic Meson8/8b/8m2 have a built-in HDMI PHY in the HHI register
> region. Unfortunately only few register bits are documented. For
> HHI_HDMI_PHY_CNTL0 the magic numbers are taken from the 3.10 vendor
> kernel.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> ---
>  drivers/phy/amlogic/Kconfig              |  10 ++
>  drivers/phy/amlogic/Makefile             |   1 +
>  drivers/phy/amlogic/phy-meson8-hdmi-tx.c | 162 +++++++++++++++++++++++
>  3 files changed, 173 insertions(+)
>  create mode 100644 drivers/phy/amlogic/phy-meson8-hdmi-tx.c
> 
> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
> index db5d0cd757e3..486ca23aba32 100644
> --- a/drivers/phy/amlogic/Kconfig
> +++ b/drivers/phy/amlogic/Kconfig
> @@ -2,6 +2,16 @@
>  #
>  # Phy drivers for Amlogic platforms
>  #
> +config PHY_MESON8_HDMI_TX
> +	tristate "Meson8, Meson8b and Meson8m2 HDMI TX PHY driver"
> +	depends on (ARCH_MESON && ARM) || COMPILE_TEST
> +	depends on OF
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support the HDMI TX PHYs found in Meson8,
> +	  Meson8b and Meson8m2 SoCs.
> +	  If unsure, say N.
> +
>  config PHY_MESON8B_USB2
>  	tristate "Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY driver"
>  	default ARCH_MESON
> diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile
> index 8fa07fbd0d92..c0886c850bb0 100644
> --- a/drivers/phy/amlogic/Makefile
> +++ b/drivers/phy/amlogic/Makefile
> @@ -1,4 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0-only
> +obj-$(CONFIG_PHY_MESON8_HDMI_TX)		+= phy-meson8-hdmi-tx.o
>  obj-$(CONFIG_PHY_MESON8B_USB2)			+= phy-meson8b-usb2.o
>  obj-$(CONFIG_PHY_MESON_GXL_USB2)		+= phy-meson-gxl-usb2.o
>  obj-$(CONFIG_PHY_MESON_G12A_USB2)		+= phy-meson-g12a-usb2.o
> diff --git a/drivers/phy/amlogic/phy-meson8-hdmi-tx.c b/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
> new file mode 100644
> index 000000000000..ba5a4de54811
> --- /dev/null
> +++ b/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
> @@ -0,0 +1,162 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Meson8, Meson8b and Meson8m2 HDMI TX PHY.
> + *
> + * Copyright (C) 2021 Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +
> +#define HHI_HDMI_PHY_CNTL0				0x0
> +	#define HHI_HDMI_PHY_CNTL0_HDMI_CTL1		GENMASK(31, 16)
> +	#define HHI_HDMI_PHY_CNTL0_HDMI_CTL0		GENMASK(15, 0)
> +
> +#define HHI_HDMI_PHY_CNTL1				0x4
> +	#define HHI_HDMI_PHY_CNTL1_CLOCK_ENABLE		BIT(1)
> +	#define HHI_HDMI_PHY_CNTL1_SOFT_RESET		BIT(0)
> +
> +#define HHI_HDMI_PHY_CNTL2				0x8
> +
> +struct phy_meson8_hdmi_tx_priv {
> +	struct regmap		*hhi;
> +	struct clk		*tmds_clk;
> +	unsigned int		reg_offset;
> +};
> +
> +static int phy_meson8_hdmi_tx_init(struct phy *phy)
> +{
> +	struct phy_meson8_hdmi_tx_priv *priv = phy_get_drvdata(phy);
> +
> +	return clk_prepare_enable(priv->tmds_clk);
> +}
> +
> +static int phy_meson8_hdmi_tx_exit(struct phy *phy)
> +{
> +	struct phy_meson8_hdmi_tx_priv *priv = phy_get_drvdata(phy);
> +
> +	clk_disable_unprepare(priv->tmds_clk);
> +
> +	return 0;
> +}
> +
> +static int phy_meson8_hdmi_tx_power_on(struct phy *phy)
> +{
> +	struct phy_meson8_hdmi_tx_priv *priv = phy_get_drvdata(phy);
> +	unsigned int i;
> +	u16 hdmi_ctl0;
> +
> +	if (clk_get_rate(priv->tmds_clk) >= 2970UL * 1000 * 1000)
> +		hdmi_ctl0 = 0x1e8b;
> +	else
> +		hdmi_ctl0 = 0x4d0b;

magic numbers..? I guess these are register offsets, would be better to
define..

> +
> +	regmap_write(priv->hhi, priv->reg_offset + HHI_HDMI_PHY_CNTL0,
> +		     FIELD_PREP(HHI_HDMI_PHY_CNTL0_HDMI_CTL1, 0x08c3) |
> +		     FIELD_PREP(HHI_HDMI_PHY_CNTL0_HDMI_CTL0, hdmi_ctl0));
> +
> +	regmap_write(priv->hhi, priv->reg_offset + HHI_HDMI_PHY_CNTL1, 0x0);
> +
> +	/* Reset three times, just like the vendor driver does */
> +	for (i = 0; i < 3; i++) {
> +		regmap_write(priv->hhi, priv->reg_offset + HHI_HDMI_PHY_CNTL1,
> +			     HHI_HDMI_PHY_CNTL1_CLOCK_ENABLE |
> +			     HHI_HDMI_PHY_CNTL1_SOFT_RESET);
> +		usleep_range(1000, 2000);
> +
> +		regmap_write(priv->hhi, priv->reg_offset + HHI_HDMI_PHY_CNTL1,
> +			     HHI_HDMI_PHY_CNTL1_CLOCK_ENABLE);
> +		usleep_range(1000, 2000);
> +	}
> +
> +	return 0;
> +}
> +
> +static int phy_meson8_hdmi_tx_power_off(struct phy *phy)
> +{
> +	struct phy_meson8_hdmi_tx_priv *priv = phy_get_drvdata(phy);
> +
> +	regmap_write(priv->hhi, priv->reg_offset + HHI_HDMI_PHY_CNTL0,
> +		     FIELD_PREP(HHI_HDMI_PHY_CNTL0_HDMI_CTL1, 0x0841) |
> +		     FIELD_PREP(HHI_HDMI_PHY_CNTL0_HDMI_CTL0, 0x8d00));

more magic..

> +
> +	return 0;
> +}
> +
> +static const struct phy_ops phy_meson8_hdmi_tx_ops = {
> +	.init		= phy_meson8_hdmi_tx_init,
> +	.exit		= phy_meson8_hdmi_tx_exit,
> +	.power_on	= phy_meson8_hdmi_tx_power_on,
> +	.power_off	= phy_meson8_hdmi_tx_power_off,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static int phy_meson8_hdmi_tx_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct phy_meson8_hdmi_tx_priv *priv;
> +	struct phy_provider *phy_provider;
> +	struct phy *phy;
> +	u32 reg[2];
> +	int ret;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	ret = device_property_read_u32_array(&pdev->dev, "reg", reg,
> +					     ARRAY_SIZE(reg));

we have reg as single property, why array with 2 entries here?

> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "Failed to parse the 'reg' property\n");
> +
> +	priv->reg_offset = reg[0];

and mystery deepens, no use of reg[1],  leftover artifacts?

> +
> +	priv->hhi = syscon_node_to_regmap(np->parent);
> +	if (IS_ERR(priv->hhi))
> +		return PTR_ERR(priv->hhi);
> +
> +	priv->tmds_clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(priv->tmds_clk))
> +		return PTR_ERR(priv->tmds_clk);
> +
> +	phy = devm_phy_create(&pdev->dev, np, &phy_meson8_hdmi_tx_ops);
> +	if (IS_ERR(phy))
> +		return PTR_ERR(phy);
> +
> +	phy_set_drvdata(phy, priv);
> +
> +	phy_provider = devm_of_phy_provider_register(&pdev->dev,
> +						     of_phy_simple_xlate);
> +
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id phy_meson8_hdmi_tx_of_match[] = {
> +	{ .compatible = "amlogic,meson8-hdmi-tx-phy" },
> +	{ .compatible = "amlogic,meson8b-hdmi-tx-phy" },
> +	{ .compatible = "amlogic,meson8m2-hdmi-tx-phy" },
> +	{ /* sentinel */ }

I see that all three are handled similarly, no difference!

Maybe also add a amlogic,meson8-hdmi compatible and use that?

-- 
~Vinod