Re: [PATCH v2] ARM: dts: at91: sama5d2_icp: enable digital filter for I2C nodes

[Nicolas Ferre]

On 27/07/2021 at 15:41, Codrin Ciubotariu wrote:
> SAMA5D2's I2C controller supports digital filter, so let's enable it.
>
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
> ---
>
> Changes in v2:
>   - removed Acked-by tag

And I add it back here ;-) :
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>

I queue the patch in at91-dt for 5.15.

Thanks Codrin, best regards,
  Nicolas

>   arch/arm/boot/dts/at91-sama5d2_icp.dts | 6 ++++++
>   1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
> index bd64721fa23c..1c235fc5f788 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
> @@ -184,6 +184,8 @@ i2c6: i2c@600 {
>   		dmas = <0>, <0>;
>   		pinctrl-names = "default";
>   		pinctrl-0 = <&pinctrl_flx4_default>;
> +		i2c-digital-filter;
> +		i2c-digital-filter-width-ns = <35>;
>   		status = "okay";
>   
>   		mcp16502@5b {
> @@ -307,6 +309,8 @@ regulator-state-mem {
>   &i2c0 { /* mikrobus i2c */
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
> +	i2c-digital-filter;
> +	i2c-digital-filter-width-ns = <35>;
>   	status = "okay";
>   };
>   
> @@ -314,6 +318,8 @@ &i2c1 {
>   	dmas = <0>, <0>;
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&pinctrl_i2c1_default>;
> +	i2c-digital-filter;
> +	i2c-digital-filter-width-ns = <35>;
>   	status = "okay";
>   
>   	eeprom@50 {


--
Nicolas Ferre