Re: [PATCH V3] iscsi_ibft: fix crash due to KASLR physical memory remapping

[Konrad Rzeszutek Wilk]

On Thu, Jul 29, 2021 at 03:52:50PM +0200, Maurizio Lombardi wrote:
> Starting with commit a799c2bd29d1
> ("x86/setup: Consolidate early memory reservations")
> memory reservations have been moved earlier during the boot process,
> before the execution of the Kernel Address Space Layout Randomization code.
> 
> setup_arch() calls the iscsi_ibft's find_ibft_region() function
> to find and reserve the memory dedicated to the iBFT and this function
> also saves a virtual pointer to the iBFT table for later use.
> 
> The problem is that if KALSR is active, the physical memory gets
> remapped somewhere else in the virtual address space and the pointer is
> no longer valid, this will cause a kernel panic when the iscsi driver tries
> to dereference it.
> 
> [   37.764225] iBFT detected.
> [   37.778877] BUG: unable to handle page fault for address: ffff888000099fd8
> [   37.816542] #PF: supervisor read access in kernel mode
> [   37.844304] #PF: error_code(0x0000) - not-present page
> [   37.872857] PGD 0 P4D 0
> [   37.886985] Oops: 0000 [#1] SMP PTI
> [   37.904809] CPU: 46 PID: 1073 Comm: modprobe Tainted: G               X --------- ---  5.13.0-0.rc2.19.el9.x86_64 #1
> [   37.956525] Hardware name: HP ProLiant DL580 G7, BIOS P65 10/01/2013
> [   37.987170] RIP: 0010:ibft_init+0x3e/0xd42 [iscsi_ibft]
> [   38.012976] Code: 04 25 28 00 00 00 48 89 44 24 08 31 c0 48 83 3d e1 cc 7e d7 00 74 28 48 c7 c7 21 81 1b c0 e8 b3 10 81 d5 48 8b 05 cc cc 7e d7 <0f> b6 70 08 48 63 50 04 40 80 fe 01 75 5e 31 f6 48 01 c2 eb 6e 83
> [   38.106835] RSP: 0018:ffffb7d288fc3db0 EFLAGS: 00010246
> [   38.131341] RAX: ffff888000099fd0 RBX: 0000000000000000 RCX: 0000000000000000
> [   38.167110] RDX: 0000000000000000 RSI: ffff9ba7efb97c80 RDI: ffff9ba7efb97c80
> [   38.200777] RBP: ffffffffc01c82be R08: 0000000000000000 R09: ffffb7d288fc3bf0
> [   38.237188] R10: ffffb7d288fc3be8 R11: ffffffff96de70a8 R12: ffff9ba4059d6400
> [   38.270940] R13: 000055689f1ac050 R14: 000055689df18962 R15: ffffb7d288fc3e78
> [   38.307167] FS:  00007f9546720b80(0000) GS:ffff9ba7efb80000(0000) knlGS:0000000000000000
> [   38.351204] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   38.381034] CR2: ffff888000099fd8 CR3: 000000044175e004 CR4: 00000000000206e0
> [   38.419938] Call Trace:
> [   38.432679]  ? ibft_create_kobject+0x1d2/0x1d2 [iscsi_ibft]
> [   38.462584]  do_one_initcall+0x44/0x1d0
> [   38.480856]  ? kmem_cache_alloc_trace+0x119/0x220
> [   38.505554]  do_init_module+0x5c/0x270
> [   38.526578]  __do_sys_init_module+0x12e/0x1b0
> [   38.548699]  do_syscall_64+0x40/0x80
> [   38.565679]  entry_SYSCALL_64_after_hwframe+0x44/0xae
> 
> Fix this bug by saving the address of the physical location
> of the ibft; later the driver will use isa_bus_to_virt() to get
> the correct virtual address.

One part that I think you are saying but just want to double-check is
that the isa_bus_to_virt() virtual addresses it returns - those are
different every boot when KASLR is enabled, right?