Re: [PATCH] PCI/portdrv: Disallow runtime suspend when waekup is required but PME service isn't supported

[Lukas Wunner]

[cc += Mika]

On Mon, Aug 09, 2021 at 12:24:12PM +0800, Kai-Heng Feng wrote:
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213873

The last comment on this bugzilla says "BIOS will fix this."
and the status is RESOLVED WILL_NOT_FIX.

Why is the patch still necessary?


> Some platforms cannot detect ethernet hotplug once its upstream port is
> runtime suspended because PME isn't enabled in _OSC.

If PME is not handled natively, why does the NIC runtime suspend?
Shouldn't this be fixed in the NIC driver by keeping the device
runtime active if PME cannot be used?


> Disallow port runtime suspend when any child device requires wakeup, so
> pci_pme_list_scan() can still read the PME status from the devices
> behind the port.

pci_pme_list_scan() is for broken devices which fail to signal PME.
Is this NIC really among them or does PME fail merely because it's not
granted to OSPM?


> --- a/drivers/pci/pcie/portdrv_pci.c
> +++ b/drivers/pci/pcie/portdrv_pci.c
> @@ -59,14 +59,30 @@ static int pcie_port_runtime_suspend(struct device *dev)
>  	return pcie_port_device_runtime_suspend(dev);
>  }
>  
> +static int pcie_port_wakeup_check(struct device *dev, void *data)
> +{
> +	struct pci_dev *pdev = to_pci_dev(dev);
> +
> +	if (!pdev)
> +		return 0;
> +
> +	return pdev->wakeup_prepared;
> +}
> +
>  static int pcie_port_runtime_idle(struct device *dev)
>  {
> +	struct pci_dev *pdev = to_pci_dev(dev);
> +
> +	if (!pcie_port_find_device(pdev, PCIE_PORT_SERVICE_PME) &&
> +	    device_for_each_child(dev, NULL, pcie_port_wakeup_check))
> +		return -EBUSY;
> +
>  	/*
>  	 * Assume the PCI core has set bridge_d3 whenever it thinks the port
>  	 * should be good to go to D3.  Everything else, including moving
>  	 * the port to D3, is handled by the PCI core.
>  	 */
> -	return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
> +	return pdev->bridge_d3 ? 0 : -EBUSY;

If an additional check is necessary for this issue, it should be
integrated into pci_dev_check_d3cold() instead of pcie_port_runtime_idle().

Thanks,

Lukas