[PATCH net-next] net: dsa: mt7530: fix VLAN traffic leaks again

[DENG Qingfang]

When a port leaves a VLAN-aware bridge, the current code does not clear
other ports' matrix field bit. If the bridge is later set to VLAN-unaware
mode, traffic in the bridge may leak to that port.

Remove the VLAN filtering check in mt7530_port_bridge_leave.

Fixes: 474a2ddaa192 ("net: dsa: mt7530: fix VLAN traffic leaks")
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@xxxxxxxxx>
---
 drivers/net/dsa/mt7530.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 53e6150e95b6..77e0205e4e59 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1315,11 +1315,8 @@ mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
 		/* Remove this port from the port matrix of the other ports
 		 * in the same bridge. If the port is disabled, port matrix
 		 * is kept and not being setup until the port becomes enabled.
-		 * And the other port's port matrix cannot be broken when the
-		 * other port is still a VLAN-aware port.
 		 */
-		if (dsa_is_user_port(ds, i) && i != port &&
-		   !dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
+		if (dsa_is_user_port(ds, i) && i != port) {
 			if (dsa_to_port(ds, i)->bridge_dev != bridge)
 				continue;
 			if (priv->ports[i].enable)
-- 
2.25.1