Re: [PATCH v2 2/2] hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max

[Guenter Roeck]

On Thu, Aug 12, 2021 at 01:40:00PM +1200, Chris Packham wrote:
> BPD-RS600 modules running firmware v5.70 misreport the MFR_PIN_MAX.
> The indicate a maximum of 1640W instead of 700W. Detect the invalid
> reading and return a sensible value instead.
> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>

Applied.

Thanks,
Guenter

> ---
> 
> Notes:
>     Changes in v2:
>     - Add comments for magic values
> 
>  drivers/hwmon/pmbus/bpa-rs600.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/drivers/hwmon/pmbus/bpa-rs600.c b/drivers/hwmon/pmbus/bpa-rs600.c
> index 84dee86399cb..f2d4e378a775 100644
> --- a/drivers/hwmon/pmbus/bpa-rs600.c
> +++ b/drivers/hwmon/pmbus/bpa-rs600.c
> @@ -65,6 +65,26 @@ static int bpa_rs600_read_vin(struct i2c_client *client)
>  	return ret;
>  }
>  
> +/*
> + * Firmware V5.70 incorrectly reports 1640W for MFR_PIN_MAX.
> + * Deal with this by returning a sensible value.
> + */
> +static int bpa_rs600_read_pin_max(struct i2c_client *client)
> +{
> +	int ret;
> +
> +	ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_MFR_PIN_MAX);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Detect invalid 1640W (linear encoding) */
> +	if (ret == 0x0b34)
> +		/* Report 700W (linear encoding) */
> +		return 0x095e;
> +
> +	return ret;
> +}
> +
>  static int bpa_rs600_read_word_data(struct i2c_client *client, int page, int phase, int reg)
>  {
>  	int ret;
> @@ -91,6 +111,9 @@ static int bpa_rs600_read_word_data(struct i2c_client *client, int page, int pha
>  	case PMBUS_READ_VIN:
>  		ret = bpa_rs600_read_vin(client);
>  		break;
> +	case PMBUS_MFR_PIN_MAX:
> +		ret = bpa_rs600_read_pin_max(client);
> +		break;
>  	default:
>  		if (reg >= PMBUS_VIRT_BASE)
>  			ret = -ENXIO;