Re: [PATCH net-next] stmmac: align RX buffers

From: Marc Zyngier
Date: Thu Aug 12 2021 - 11:26:47 EST


On Thu, 12 Aug 2021 15:29:06 +0100,
Thierry Reding <thierry.reding@xxxxxxxxx> wrote:
>
> On Wed, Aug 11, 2021 at 02:23:10PM +0100, Marc Zyngier wrote:

[...]

> > I love this machine... Did this issue occur with the Denver CPUs
> > disabled?
>
> Interestingly I've been doing some work on a newer device called Jetson
> TX2 NX (which is kind of a trimmed-down version of Jetson TX2, in the
> spirit of the Jetson Nano) and I can't seem to reproduce these failures
> there (tested on next-20210812).
>
> I'll go dig out my Jetson TX2 to run the same tests there, because I've
> also been using a development version of the bootloader stack and
> flashing tools and all that, so it's possible that something was fixed
> at that level. I don't think I've ever tried disabling the Denver CPUs,
> but then I've also never seen these issues myself.
>
> Just out of curiosity, what version of the BSP have you been using to
> flash?

I've only used the BSP for a few weeks when I got the board last
year. The only thing I use from it is u-boot to chainload an upstream
u-boot, and boot Debian from there.

> One other thing that I ran into: there's a known issue with the PHY
> configuration. We mark the PHY on most devices as "rgmii-id" on most
> devices and then the Marvell PHY driver needs to be enabled. Jetson TX2
> has phy-mode = "rgmii", so it /should/ work okay.
>
> Typically what we're seeing with that misconfiguration is that the
> device fails to get an IP address, but it might still be worth trying to
> switch Jetson TX2 to rgmii-id and using the Marvell PHY, to see if that
> improves anything.

I never failed to get an IP address. Overall, networking has been
solid on this machine until this patch. I'll try and mess with this
when I get time, but that's probably going to be next week now.

[...]

> > That'd be pretty annoying. Do you know if the Ethernet is a coherent
> > device on this machine? or does it need active cache maintenance?
>
> I don't think Ethernet is a coherent device on Tegra186. I think
> Tegra194 had various improvements with regard to coherency, but most
> devices on Tegra186 do need active cache maintenance.
>
> Let me dig through some old patches and mailing list threads. I vaguely
> recall prototyping a patch that did something special for outer cache
> flushing, but that may have been Tegra132, not Tegra186. I also don't
> think we ended up merging that because it turned out to not be needed.

ARMv8 forbid any sort of *visible* outer cache, so I really hope this
is not required. We wouldn't be able to support it.

Thanks,

M.

--
Without deviation from the norm, progress is not possible.