[PATCH v6 1/5] iio: adc: ad7949: define and use bitfield names

From: Liam Beguin
Date: Sun Aug 15 2021 - 17:34:45 EST


From: Liam Beguin <lvb@xxxxxxxxxx>

Replace raw configuration register values by using FIELD_PREP and
defines to improve readability.

Signed-off-by: Liam Beguin <lvb@xxxxxxxxxx>
---
drivers/iio/adc/ad7949.c | 55 ++++++++++++++++++++++++++++++++--------
1 file changed, 45 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c
index 1b4b3203e428..adc4487a7d56 100644
--- a/drivers/iio/adc/ad7949.c
+++ b/drivers/iio/adc/ad7949.c
@@ -11,13 +11,39 @@
#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
+#include <linux/bitfield.h>

-#define AD7949_MASK_CHANNEL_SEL GENMASK(9, 7)
-#define AD7949_MASK_TOTAL GENMASK(13, 0)
-#define AD7949_OFFSET_CHANNEL_SEL 7
-#define AD7949_CFG_READ_BACK 0x1
+#define AD7949_CFG_MASK_TOTAL GENMASK(13, 0)
#define AD7949_CFG_REG_SIZE_BITS 14

+/* CFG: Configuration Update */
+#define AD7949_CFG_MASK_OVERWRITE BIT(13)
+
+/* INCC: Input Channel Configuration */
+#define AD7949_CFG_MASK_INCC GENMASK(12, 10)
+#define AD7949_CFG_VAL_INCC_UNIPOLAR_GND 7
+#define AD7949_CFG_VAL_INCC_UNIPOLAR_COMM 6
+#define AD7949_CFG_VAL_INCC_UNIPOLAR_DIFF 4
+#define AD7949_CFG_VAL_INCC_TEMP 3
+#define AD7949_CFG_VAL_INCC_BIPOLAR 2
+#define AD7949_CFG_VAL_INCC_BIPOLAR_DIFF 0
+
+/* INX: Input channel Selection in a binary fashion */
+#define AD7949_CFG_MASK_INX GENMASK(9, 7)
+
+/* BW: select bandwidth for low-pass filter. Full or Quarter */
+#define AD7949_CFG_MASK_BW_FULL BIT(6)
+
+/* REF: reference/buffer selection */
+#define AD7949_CFG_MASK_REF GENMASK(5, 3)
+#define AD7949_CFG_VAL_REF_EXT_BUF 7
+
+/* SEQ: channel sequencer. Allows for scanning channels */
+#define AD7949_CFG_MASK_SEQ GENMASK(2, 1)
+
+/* RB: Read back the CFG register */
+#define AD7949_CFG_MASK_RBN BIT(0)
+
enum {
ID_AD7949 = 0,
ID_AD7682,
@@ -109,8 +135,8 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
*/
for (i = 0; i < 2; i++) {
ret = ad7949_spi_write_cfg(ad7949_adc,
- channel << AD7949_OFFSET_CHANNEL_SEL,
- AD7949_MASK_CHANNEL_SEL);
+ FIELD_PREP(AD7949_CFG_MASK_INX, channel),
+ AD7949_CFG_MASK_INX);
if (ret)
return ret;
if (channel == ad7949_adc->current_channel)
@@ -199,8 +225,8 @@ static int ad7949_spi_reg_access(struct iio_dev *indio_dev,
if (readval)
*readval = ad7949_adc->cfg;
else
- ret = ad7949_spi_write_cfg(ad7949_adc,
- writeval & AD7949_MASK_TOTAL, AD7949_MASK_TOTAL);
+ ret = ad7949_spi_write_cfg(ad7949_adc, writeval,
+ AD7949_CFG_MASK_TOTAL);

return ret;
}
@@ -214,10 +240,19 @@ static int ad7949_spi_init(struct ad7949_adc_chip *ad7949_adc)
{
int ret;
int val;
+ u16 cfg;

- /* Sequencer disabled, CFG readback disabled, IN0 as default channel */
ad7949_adc->current_channel = 0;
- ret = ad7949_spi_write_cfg(ad7949_adc, 0x3C79, AD7949_MASK_TOTAL);
+
+ cfg = FIELD_PREP(AD7949_CFG_MASK_OVERWRITE, 1) |
+ FIELD_PREP(AD7949_CFG_MASK_INCC, AD7949_CFG_VAL_INCC_UNIPOLAR_GND) |
+ FIELD_PREP(AD7949_CFG_MASK_INX, ad7949_adc->current_channel) |
+ FIELD_PREP(AD7949_CFG_MASK_BW_FULL, 1) |
+ FIELD_PREP(AD7949_CFG_MASK_REF, AD7949_CFG_VAL_REF_EXT_BUF) |
+ FIELD_PREP(AD7949_CFG_MASK_SEQ, 0x0) |
+ FIELD_PREP(AD7949_CFG_MASK_RBN, 1);
+
+ ret = ad7949_spi_write_cfg(ad7949_adc, cfg, AD7949_CFG_MASK_TOTAL);

/*
* Do two dummy conversions to apply the first configuration setting.
--
2.32.0.452.g940fe202adcb