Re: [PATCH v2] mtd: rawnand: xway: No hardcoded ECC engine, use device tree setting

From: Miquel Raynal
Date: Mon Aug 16 2021 - 03:31:41 EST


Hi Daniel,

Daniel Kestrel <kestrelseventyfour@xxxxxxxxx> wrote on Sun, 8 Aug 2021
09:26:43 +0200:

> Some devices use Micron NAND chips, which use on-die ECC. The hardcoded
> setting of NAND_ECC_ENGINE_TYPE_SOFT makes them unusable, because the
> software ECC on top of the hardware ECC produces errors for every read
> and write access, not to mention that booting does not work, because
> the boot loader uses the correct ECC when trying to load the kernel
> and stops loading on severe ECC errors.
> This patch requires the devices that currently work with the hard coded
> setting to set the nand-ecc-mode property to soft in their device
> tree.
>

Please add a Fixes: and Cc: stable tags, you will also need to send to
stable@xxxxxxxxxxxxxxx a different version of the patch for the kernel
5.4 IIUC.

> Signed-off-by: Daniel Kestrel <kestrelseventyfour@xxxxxxxxx>
> Tested-by: Aleksander Jan Bajkowski <olek2@xxxxx> # tested on BT Home Hub 5A
> ---
> drivers/mtd/nand/raw/xway_nand.c | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/xway_nand.c b/drivers/mtd/nand/raw/xway_nand.c
> index 26751976e502..0a4b0aa7dd4c 100644
> --- a/drivers/mtd/nand/raw/xway_nand.c
> +++ b/drivers/mtd/nand/raw/xway_nand.c
> @@ -148,8 +148,6 @@ static void xway_write_buf(struct nand_chip *chip, const u_char *buf, int len)
>
> static int xway_attach_chip(struct nand_chip *chip)
> {
> - chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
> -
> if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
> chip->ecc.algo = NAND_ECC_ALGO_HAMMING;

You also need to only set the Hamming algorithm when engine_type is
TYPE_SOFT.

Thanks,
Miquèl