Re: [PATCH 2/4] iio: st_sensors: remove st_sensors_power_disable() function

From: Alexandru Ardelean
Date: Mon Aug 16 2021 - 03:48:31 EST

Next message: Miquel Raynal: "Re: [PATCH] mtd: rawnand: intel: Fix error handling in probe"
Previous message: Leizhen (ThunderTown): "Re: [PATCH 1/4] iommu/arm-smmu-v3: Use command queue batching helpers to improve performance"
Next in thread: Jonathan Cameron: "Re: [PATCH 2/4] iio: st_sensors: remove st_sensors_power_disable() function"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, 2 Aug 2021 at 10:30, Alexandru Ardelean <aardelean@xxxxxxxxxxx> wrote:
>
> On Sat, 31 Jul 2021 at 20:34, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> >
> > On Mon, 26 Jul 2021 10:14:02 +0300
> > Alexandru Ardelean <aardelean@xxxxxxxxxxx> wrote:
> >
> > > This change converts the st_sensors_power_enable() function to use
> > > devm_add_action_or_reset() handlers to register regulator_disable hooks for
> > > when the drivers get unloaded.
> > >
> > > The parent device of the IIO device object is used. This is based on the
> > > assumption that all other devm_ calls in the ST sensors use this reference.
> > >
> > > This makes the st_sensors_power_disable() un-needed.
> > > Removing this also changes unload order a bit, as all ST drivers would call
> > > st_sensors_power_disable() first and iio_device_unregister() after that.
> >
> > Huh. So currently the drivers turn the power off before calling
> > iio_device_unregister()?
> >
> > That's a bad idea (turn off power when userspace is still available)
> > and looks like a bug fix to me. Perhaps the reorder should be pulled out as
> > a precursor patch in case anyone wants to backport it?
> >
> > (note I initially thought you were going the other way and was just writing
> > a rant about breaking the order when I realised you were fixing it ;)

I'm seeing a bit of a clash with this patch [by Andy from April 2021]:

https://lore.kernel.org/linux-devicetree/20210414195454.84183-4-andriy.shevchenko@xxxxxxxxxxxxxxx/

I can do the fix commits, but they will be short-lived, since they
will be applied on 5.13 and onwards.
We'd need maybe another set for the LTS kernels.

So, how should we proceed here?
I think I'll do the fix commits anyway for this set.

Thanks
Alex

>
> Probably the best advantage of devm_ functions .
> Not needing to care about un-init order.
>
> I hated debugging driver crashes when they were unloaded, usually
> because the driver gets into a weird state.
>
> I'll send a V2 with the re-order fixes in the front.
>
> >
> > >
> > > Signed-off-by: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
> > > ---
> > > drivers/iio/accel/st_accel_i2c.c | 13 +------
> > > drivers/iio/accel/st_accel_spi.c | 13 +------
> > > .../iio/common/st_sensors/st_sensors_core.c | 34 ++++++++-----------
> > > drivers/iio/gyro/st_gyro_i2c.c | 13 +------
> > > drivers/iio/gyro/st_gyro_spi.c | 13 +------
> > > drivers/iio/magnetometer/st_magn_i2c.c | 13 +------
> > > drivers/iio/magnetometer/st_magn_spi.c | 13 +------
> > > drivers/iio/pressure/st_pressure_i2c.c | 13 +------
> > > drivers/iio/pressure/st_pressure_spi.c | 13 +------
> > > include/linux/iio/common/st_sensors.h | 2 --
> > > 10 files changed, 23 insertions(+), 117 deletions(-)
> > >
> > > diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
> > > index f711756e41e3..b377575efc41 100644
> > > --- a/drivers/iio/accel/st_accel_i2c.c
> > > +++ b/drivers/iio/accel/st_accel_i2c.c
> > > @@ -177,24 +177,13 @@ static int st_accel_i2c_probe(struct i2c_client *client)
> > > if (ret)
> > > return ret;
> > >
> > > - ret = st_accel_common_probe(indio_dev);
> > > - if (ret < 0)
> > > - goto st_accel_power_off;
> > > -
> > > - return 0;
> > > -
> > > -st_accel_power_off:
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > - return ret;
> > > + return st_accel_common_probe(indio_dev);
> > > }
> > >
> > > static int st_accel_i2c_remove(struct i2c_client *client)
> > > {
> > > struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > >
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > st_accel_common_remove(indio_dev);
> > >
> > > return 0;
> > > diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
> > > index bb45d9ff95b8..4ca87e73bdb3 100644
> > > --- a/drivers/iio/accel/st_accel_spi.c
> > > +++ b/drivers/iio/accel/st_accel_spi.c
> > > @@ -127,24 +127,13 @@ static int st_accel_spi_probe(struct spi_device *spi)
> > > if (err)
> > > return err;
> > >
> > > - err = st_accel_common_probe(indio_dev);
> > > - if (err < 0)
> > > - goto st_accel_power_off;
> > > -
> > > - return 0;
> > > -
> > > -st_accel_power_off:
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > - return err;
> > > + return st_accel_common_probe(indio_dev);
> > > }
> > >
> > > static int st_accel_spi_remove(struct spi_device *spi)
> > > {
> > > struct iio_dev *indio_dev = spi_get_drvdata(spi);
> > >
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > st_accel_common_remove(indio_dev);
> > >
> > > return 0;
> > > diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
> > > index 0bbb090b108c..a5a140de9a23 100644
> > > --- a/drivers/iio/common/st_sensors/st_sensors_core.c
> > > +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
> > > @@ -215,13 +215,19 @@ int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable)
> > > }
> > > EXPORT_SYMBOL(st_sensors_set_axis_enable);
> > >
> > > +static void st_reg_disable(void *reg)
> > > +{
> > > + regulator_disable(reg);
> > > +}
> > > +
> > > int st_sensors_power_enable(struct iio_dev *indio_dev)
> > > {
> > > struct st_sensor_data *pdata = iio_priv(indio_dev);
> > > + struct device *parent = indio_dev->dev.parent;
> > > int err;
> > >
> > > /* Regulators not mandatory, but if requested we should enable them. */
> > > - pdata->vdd = devm_regulator_get(indio_dev->dev.parent, "vdd");
> > > + pdata->vdd = devm_regulator_get(parent, "vdd");
> > > if (IS_ERR(pdata->vdd)) {
> > > dev_err(&indio_dev->dev, "unable to get Vdd supply\n");
> > > return PTR_ERR(pdata->vdd);
> > > @@ -233,36 +239,26 @@ int st_sensors_power_enable(struct iio_dev *indio_dev)
> > > return err;
> > > }
> > >
> > > - pdata->vdd_io = devm_regulator_get(indio_dev->dev.parent, "vddio");
> > > + err = devm_add_action_or_reset(parent, st_reg_disable, pdata->vdd);
> > > + if (err)
> > > + return err;
> > > +
> > > + pdata->vdd_io = devm_regulator_get(parent, "vddio");
> > > if (IS_ERR(pdata->vdd_io)) {
> > > dev_err(&indio_dev->dev, "unable to get Vdd_IO supply\n");
> > > - err = PTR_ERR(pdata->vdd_io);
> > > - goto st_sensors_disable_vdd;
> > > + return PTR_ERR(pdata->vdd_io);
> > > }
> > > err = regulator_enable(pdata->vdd_io);
> > > if (err != 0) {
> > > dev_warn(&indio_dev->dev,
> > > "Failed to enable specified Vdd_IO supply\n");
> > > - goto st_sensors_disable_vdd;
> > > + return err;
> > > }
> > >
> > > - return 0;
> > > -
> > > -st_sensors_disable_vdd:
> > > - regulator_disable(pdata->vdd);
> > > - return err;
> > > + return devm_add_action_or_reset(parent, st_reg_disable, pdata->vdd_io);
> > > }
> > > EXPORT_SYMBOL(st_sensors_power_enable);
> > >
> > > -void st_sensors_power_disable(struct iio_dev *indio_dev)
> > > -{
> > > - struct st_sensor_data *pdata = iio_priv(indio_dev);
> > > -
> > > - regulator_disable(pdata->vdd);
> > > - regulator_disable(pdata->vdd_io);
> > > -}
> > > -EXPORT_SYMBOL(st_sensors_power_disable);
> > > -
> > > static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
> > > struct st_sensors_platform_data *pdata)
> > > {
> > > diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
> > > index 3ef86e16ee65..0bd80dfd389f 100644
> > > --- a/drivers/iio/gyro/st_gyro_i2c.c
> > > +++ b/drivers/iio/gyro/st_gyro_i2c.c
> > > @@ -90,24 +90,13 @@ static int st_gyro_i2c_probe(struct i2c_client *client,
> > > if (err)
> > > return err;
> > >
> > > - err = st_gyro_common_probe(indio_dev);
> > > - if (err < 0)
> > > - goto st_gyro_power_off;
> > > -
> > > - return 0;
> > > -
> > > -st_gyro_power_off:
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > - return err;
> > > + return st_gyro_common_probe(indio_dev);
> > > }
> > >
> > > static int st_gyro_i2c_remove(struct i2c_client *client)
> > > {
> > > struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > >
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > st_gyro_common_remove(indio_dev);
> > >
> > > return 0;
> > > diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
> > > index 41d835493347..f74b09fa5cde 100644
> > > --- a/drivers/iio/gyro/st_gyro_spi.c
> > > +++ b/drivers/iio/gyro/st_gyro_spi.c
> > > @@ -94,24 +94,13 @@ static int st_gyro_spi_probe(struct spi_device *spi)
> > > if (err)
> > > return err;
> > >
> > > - err = st_gyro_common_probe(indio_dev);
> > > - if (err < 0)
> > > - goto st_gyro_power_off;
> > > -
> > > - return 0;
> > > -
> > > -st_gyro_power_off:
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > - return err;
> > > + return st_gyro_common_probe(indio_dev);
> > > }
> > >
> > > static int st_gyro_spi_remove(struct spi_device *spi)
> > > {
> > > struct iio_dev *indio_dev = spi_get_drvdata(spi);
> > >
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > st_gyro_common_remove(indio_dev);
> > >
> > > return 0;
> > > diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
> > > index 2dfe4ee99591..0a5117dffcf4 100644
> > > --- a/drivers/iio/magnetometer/st_magn_i2c.c
> > > +++ b/drivers/iio/magnetometer/st_magn_i2c.c
> > > @@ -86,24 +86,13 @@ static int st_magn_i2c_probe(struct i2c_client *client,
> > > if (err)
> > > return err;
> > >
> > > - err = st_magn_common_probe(indio_dev);
> > > - if (err < 0)
> > > - goto st_magn_power_off;
> > > -
> > > - return 0;
> > > -
> > > -st_magn_power_off:
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > - return err;
> > > + return st_magn_common_probe(indio_dev);
> > > }
> > >
> > > static int st_magn_i2c_remove(struct i2c_client *client)
> > > {
> > > struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > >
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > st_magn_common_remove(indio_dev);
> > >
> > > return 0;
> > > diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
> > > index fba978796395..1f3bf02b24e0 100644
> > > --- a/drivers/iio/magnetometer/st_magn_spi.c
> > > +++ b/drivers/iio/magnetometer/st_magn_spi.c
> > > @@ -80,24 +80,13 @@ static int st_magn_spi_probe(struct spi_device *spi)
> > > if (err)
> > > return err;
> > >
> > > - err = st_magn_common_probe(indio_dev);
> > > - if (err < 0)
> > > - goto st_magn_power_off;
> > > -
> > > - return 0;
> > > -
> > > -st_magn_power_off:
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > - return err;
> > > + return st_magn_common_probe(indio_dev);
> > > }
> > >
> > > static int st_magn_spi_remove(struct spi_device *spi)
> > > {
> > > struct iio_dev *indio_dev = spi_get_drvdata(spi);
> > >
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > st_magn_common_remove(indio_dev);
> > >
> > > return 0;
> > > diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
> > > index 52fa98f24478..afeeab485c0d 100644
> > > --- a/drivers/iio/pressure/st_pressure_i2c.c
> > > +++ b/drivers/iio/pressure/st_pressure_i2c.c
> > > @@ -103,24 +103,13 @@ static int st_press_i2c_probe(struct i2c_client *client,
> > > if (ret)
> > > return ret;
> > >
> > > - ret = st_press_common_probe(indio_dev);
> > > - if (ret < 0)
> > > - goto st_press_power_off;
> > > -
> > > - return 0;
> > > -
> > > -st_press_power_off:
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > - return ret;
> > > + return st_press_common_probe(indio_dev);
> > > }
> > >
> > > static int st_press_i2c_remove(struct i2c_client *client)
> > > {
> > > struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > >
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > st_press_common_remove(indio_dev);
> > >
> > > return 0;
> > > diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
> > > index ee393df54cee..834ad6d40a70 100644
> > > --- a/drivers/iio/pressure/st_pressure_spi.c
> > > +++ b/drivers/iio/pressure/st_pressure_spi.c
> > > @@ -86,24 +86,13 @@ static int st_press_spi_probe(struct spi_device *spi)
> > > if (err)
> > > return err;
> > >
> > > - err = st_press_common_probe(indio_dev);
> > > - if (err < 0)
> > > - goto st_press_power_off;
> > > -
> > > - return 0;
> > > -
> > > -st_press_power_off:
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > - return err;
> > > + return st_press_common_probe(indio_dev);
> > > }
> > >
> > > static int st_press_spi_remove(struct spi_device *spi)
> > > {
> > > struct iio_dev *indio_dev = spi_get_drvdata(spi);
> > >
> > > - st_sensors_power_disable(indio_dev);
> > > -
> > > st_press_common_remove(indio_dev);
> > >
> > > return 0;
> > > diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
> > > index e74b55244f35..fc90c202d15e 100644
> > > --- a/include/linux/iio/common/st_sensors.h
> > > +++ b/include/linux/iio/common/st_sensors.h
> > > @@ -293,8 +293,6 @@ int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable);
> > >
> > > int st_sensors_power_enable(struct iio_dev *indio_dev);
> > >
> > > -void st_sensors_power_disable(struct iio_dev *indio_dev);
> > > -
> > > int st_sensors_debugfs_reg_access(struct iio_dev *indio_dev,
> > > unsigned reg, unsigned writeval,
> > > unsigned *readval);
> >

Next message: Miquel Raynal: "Re: [PATCH] mtd: rawnand: intel: Fix error handling in probe"
Previous message: Leizhen (ThunderTown): "Re: [PATCH 1/4] iommu/arm-smmu-v3: Use command queue batching helpers to improve performance"
Next in thread: Jonathan Cameron: "Re: [PATCH 2/4] iio: st_sensors: remove st_sensors_power_disable() function"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]