[PATCH v4 11/21] platform/x86: intel_turbo_max_3: Move to intel sub-directory

[Andy Shevchenko]

From: Kate Hsuan <hpa@xxxxxxxxxx>

Move Intel Turbo Max 3 driver to intel sub-directory to improve readability
and rename it from intel_turbo_max_3.c to turbo_max_3.c.

Signed-off-by: Kate Hsuan <hpa@xxxxxxxxxx>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/platform/x86/Kconfig                          | 10 ----------
 drivers/platform/x86/Makefile                         |  1 -
 drivers/platform/x86/intel/Kconfig                    | 11 +++++++++++
 drivers/platform/x86/intel/Makefile                   |  2 ++
 .../x86/{intel_turbo_max_3.c => intel/turbo_max_3.c}  |  0
 5 files changed, 13 insertions(+), 11 deletions(-)
 rename drivers/platform/x86/{intel_turbo_max_3.c => intel/turbo_max_3.c} (100%)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 2c99c43c166f..e43b8f1e7ec6 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1102,16 +1102,6 @@ config INTEL_IMR
 
 source "drivers/platform/x86/intel_speed_select_if/Kconfig"
 
-config INTEL_TURBO_MAX_3
-	bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
-	depends on X86_64 && SCHED_MC_PRIO
-	help
-	  This driver reads maximum performance ratio of each CPU and set up
-	  the scheduler priority metrics. In this way scheduler can prefer
-	  CPU with higher performance to schedule tasks.
-	  This driver is only required when the system is not using Hardware
-	  P-States (HWP). In HWP mode, priority can be read from ACPI tables.
-
 config INTEL_UNCORE_FREQ_CONTROL
 	tristate "Intel Uncore frequency control driver"
 	depends on X86_64
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 5a9ce0158a82..fd44f1c13064 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -120,7 +120,6 @@ obj-$(CONFIG_WIRELESS_HOTKEY)		+= wireless-hotkey.o
 
 # Intel uncore drivers
 obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE)	+= intel_speed_select_if/
-obj-$(CONFIG_INTEL_TURBO_MAX_3)			+= intel_turbo_max_3.o
 obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)		+= intel-uncore-frequency.o
 
 obj-$(CONFIG_PMC_ATOM)			+= pmc_atom.o
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index d9f80932410f..afede107a805 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -98,4 +98,15 @@ config INTEL_SMARTCONNECT
 	  This driver checks to determine whether the device has Intel Smart
 	  Connect enabled, and if so disables it.
 
+config INTEL_TURBO_MAX_3
+	bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
+	depends on X86_64 && SCHED_MC_PRIO
+	help
+	  This driver reads maximum performance ratio of each CPU and set up
+	  the scheduler priority metrics. In this way scheduler can prefer
+	  CPU with higher performance to schedule tasks.
+
+	  This driver is only required when the system is not using Hardware
+	  P-States (HWP). In HWP mode, priority can be read from ACPI tables.
+
 endif # X86_PLATFORM_DRIVERS_INTEL
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index 8513fbdf3454..62f8a1421c47 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -29,3 +29,5 @@ intel-rst-y				:= rst.o
 obj-$(CONFIG_INTEL_RST)			+= intel-rst.o
 intel-smartconnect-y			:= smartconnect.o
 obj-$(CONFIG_INTEL_SMARTCONNECT)	+= intel-smartconnect.o
+intel_turbo_max_3-y			:= turbo_max_3.o
+obj-$(CONFIG_INTEL_TURBO_MAX_3)		+= intel_turbo_max_3.o
diff --git a/drivers/platform/x86/intel_turbo_max_3.c b/drivers/platform/x86/intel/turbo_max_3.c
similarity index 100%
rename from drivers/platform/x86/intel_turbo_max_3.c
rename to drivers/platform/x86/intel/turbo_max_3.c
-- 
2.32.0