[PATCH] powerpc/512x: Fix an error handling path in 'mpc512x_lpbfifo_kick()'

[Christophe JAILLET]

At this point 'dma_map_single()' has not been called yet, so there is no
point in branching in the error handling path to undo it.

Use a direct return instead.

Fixes: 1a4bb93f7955 ("powerpc/512x: add LocalPlus Bus FIFO device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
This patch is speculative. Review with care.
---
 arch/powerpc/platforms/512x/mpc512x_lpbfifo.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
index 04bf6ecf7d55..85e0fa7d902b 100644
--- a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
+++ b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
@@ -240,10 +240,8 @@ static int mpc512x_lpbfifo_kick(void)
 	dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 
 	/* Make DMA channel work with LPB FIFO data register */
-	if (dma_dev->device_config(lpbfifo.chan, &dma_conf)) {
-		ret = -EINVAL;
-		goto err_dma_prep;
-	}
+	if (dma_dev->device_config(lpbfifo.chan, &dma_conf))
+		return -EINVAL;
 
 	sg_init_table(&sg, 1);
 
-- 
2.30.2