Re: [PATCH v2] mtd: rawnand: xway: No hardcoded ECC engine, use device tree setting

[Kestrel seventyfour]

Hi Miquèl,

Am Mi., 25. Aug. 2021 um 17:31 Uhr schrieb Miquel Raynal
<miquel.raynal@xxxxxxxxxxx>:
>
> > > > > > > > thank you for your response.
> > > > > > > > If I remove the nand-ecc-xxx properties in the device tree, the device with
> > > > > > > > the Toshiba NAND chip is working. However, the device with the Micron
> > > > > > > > NAND fails with NO ECC functions supplied; hardware ECC not possible,
> > > > > > > > seems to be at line 5367 or equivalent.
> > > > > > > > https://elixir.bootlin.com/linux/latest/source/drivers/mtd/nand/raw/nand_base.c#L5367
> > > > > > > >
> > > > > > > > It looks like the micron nand driver supports on die only if its
> > > > > > > > specified int the
> > > > > > > > Device tree:
> > > > > > > > https://elixir.bootlin.com/linux/latest/source/drivers/mtd/nand/raw/nand_micron.c#L511
> > > > > > > > The Micron NAND driver probably needs to set the ECC type to ON DIE if the
> > > > > > > > variable ondie contains the supported attribute?!
> > > > > > >
> > > > > > > You're right but I don't see any easy upstream-able solution here.
> > > > > > > Changing the behavior in the Xway driver would certainly break users,
> > > > > > > changing the behavior in the Micron driver would certainly break even
> > > > > > > more users. The root cause being an absence of proper description (the
> > > > > > > integration changed). Honestly I feel stuck, maybe you can try to
> > > > > > > register your device, if it fails, change the integration in the driver
> > > > > > > (to an ondie ecc engine) then retry?
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Miquèl
> > > > > >
> > > > > > Do you think adding something like below at the following location
> > > > > > https://elixir.bootlin.com/linux/latest/source/drivers/mtd/nand/raw/xway_nand.c#L223
> > > > > > would be upstreamable (with or without device tree property?)?
> > > > > >
> > > > > >         err = nand_scan(&data->chip, 1);
> > > > > >         if (err /* && of_property_read_bool(np, "lantiq,retry-on-die") */) {
> > > > > >                 data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_DIE;
> > > > > >                 err = nand_scan(&data->chip, 1);
> > > > > >                 if (err) return err;
> > > > > >         }
> > > > > >
> > > > > > It still throws the kernel warning on first try, but the second try then works.
> > > > >
> > > > > Can you please remind me what is xway/lantiq/your setup/how public it
> > > > > is/who's using this driver?
> > > > >
> > > > > Thanks,
> > > > > Miquèl
> > > >
> > > > Its for Openwrt, I would like to add support for 3 more devices
> > > > AVM fritzbox 3490/5490 and 7490. They all have varying NAND chips.
> > > > I have initially created a PR to have my initial patch tested:
> > > > https://github.com/openwrt/openwrt/pull/4426
> > > > There is already one device supported which has two DTBs one for
> > > > Micron and one for non Micron (3370), but its not very straight forward.
> > > > Without having this issue solved, flashing those devices would be
> > > > possibly having issues depending on NAND chip or the awkward
> > > > workaround of flashing one image and if it does not boot, boot the
> > > > other one. Without self soldered serial console, it would not very
> > > > easy to figure out the NAND manufacturer.
> > > > The AVM stock firmware is old kernel and does not use device
> > > > tree for NAND, they just query all possible manufacturers and set
> > > > up NAND based on manufacturer query.
> > >
> > > But in this case can't you check the 'root' compatible against certain
> > > values and and some kind of quirk in the ->attach() hook to update the
> > > ECC engine to the right one?
> > >
> > > Thanks,
> > > Miquèl
> >
> > maybe I wrote the wrong thing, but what do you mean with root compatible.
> > The controller is always NAND xway and I think there are 4 different
> > NAND chip types. But the stock firmware just queries the NAND
> > manufacturer name, not a date or type/model of the devices. E.g. 7490 can
> > have Micron or Macronix NAND, but querying the Micron id or Macronix
> > id requires a change to the xway driver?
> > Do you mean something like in the first patch do query the manufacturer
> > but just for all the 4?
> >
> > Thanks, Daniel.
>
> You were talking about new boards, if, on each of these boards, you
> know what is the NAND chip, you could retrieve the root compatible (by
> root I mean the one at the root of the tree / { } in the DT) and
> depending on it change the ECC engine that must be used from the driver
> itself.
>
>
> Thanks,
> Miquèl

The boards are not supported yet in OpenWrt and there is the
existing fritzbox 3370. Fritzbox 7490 first manufacture date was 2013.
As I stated the 7490 can have either Micron or Macronix NAND with
no indicator. I was just hoping there is a dynamic way to support
both NAND chips without having to build two different images with two
different DTBs. For this case, DTB is too static.

Thanks, Daniel.