[PATCH] Input: ili210x - Set the device name according to the device model

[Rogerio Pimentel]

Adding the device model into the device name is useful when
applications need to set different parameters according to the
touchscreen being used, e.g. X11 calibration points.

Signed-off-by: Rogerio Pimentel <rpimentel.silva@xxxxxxxxx>
---
 drivers/input/touchscreen/ili210x.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
index 30576a5f2f04..ca7af4a6f588 100644
--- a/drivers/input/touchscreen/ili210x.c
+++ b/drivers/input/touchscreen/ili210x.c
@@ -19,6 +19,8 @@
 #define ILI251X_DATA_SIZE1	31
 #define ILI251X_DATA_SIZE2	20
 
+#define ILI_NAME_LEN		27
+
 /* Touchscreen commands */
 #define REG_TOUCHDATA		0x10
 #define REG_PANEL_INFO		0x20
@@ -394,6 +396,7 @@ static int ili210x_i2c_probe(struct i2c_client *client,
 	struct input_dev *input;
 	int error;
 	unsigned int max_xy;
+	char *model_name;
 
 	dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver");
 
@@ -440,7 +443,11 @@ static int ili210x_i2c_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, priv);
 
 	/* Setup input device */
-	input->name = "ILI210x Touchscreen";
+	input->name = "Ilitek         Touchscreen";
+	model_name = (char *)input->name;
+	snprintf(model_name, ILI_NAME_LEN, "Ilitek %s Touchscreen",
+	id->name);
+	input->name = model_name;
 	input->id.bustype = BUS_I2C;
 
 	/* Multi touch */
@@ -487,10 +494,10 @@ static int ili210x_i2c_probe(struct i2c_client *client,
 }
 
 static const struct i2c_device_id ili210x_i2c_id[] = {
-	{ "ili210x", (long)&ili210x_chip },
-	{ "ili2117", (long)&ili211x_chip },
-	{ "ili2120", (long)&ili212x_chip },
-	{ "ili251x", (long)&ili251x_chip },
+	{ .name = "ili210x", (long)&ili210x_chip },
+	{ .name = "ili2117", (long)&ili211x_chip },
+	{ .name = "ili2120", (long)&ili212x_chip },
+	{ .name = "ili251x", (long)&ili251x_chip },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id);
-- 
2.17.1