Re: [Intel-gfx] [PATCH v7 5/8] drm_print: add choice to use dynamic debug in drm-debug
From: Tvrtko Ursulin
Date: Fri Sep 03 2021 - 07:15:37 EST
On 31/08/2021 21:21, Jim Cromie wrote:
drm's debug system writes 10 distinct categories of messages to syslog
using a small API[1]: drm_dbg*(10 names), DRM_DEV_DEBUG*(3 names),
DRM_DEBUG*(8 names). There are thousands of these callsites, each
categorized in this systematized way.
These callsites can be enabled at runtime by their category, each
controlled by a bit in drm.debug (/sys/modules/drm/parameter/debug).
In the current "basic" implementation, drm_debug_enabled() tests these
bits in __drm_debug each time an API[1] call is executed; while cheap
individually, the costs accumulate with uptime.
This patch uses dynamic-debug with jump-label to patch enabled calls
onto their respective NOOP slots, avoiding all runtime bit-checks of
__drm_debug by drm_debug_enabled().
Dynamic debug has no concept of category, but we can emulate one by
replacing enum categories with a set of prefix-strings; "drm:core:",
"drm:kms:" "drm:driver:" etc, and prepend them (at compile time) to
the given formats.
Then we can use:
`echo module drm format "^drm:core: " +p > control`
to enable the whole category with one query.
Probably stupid question - enabling stuff at boot time still works as
described in Documentation/admin-guide/dynamic-debug-howto.rst?
Second question, which perhaps has been covered in the past so apologies
if redundant - what is the advantage of allowing this to be
configurable, versus perhaps always enabling it? Like what would be the
reasons someone wouldn't just want to have CONFIG_DYNAMIC_DEBUG compiled
in? Kernel binary size?
Regards,
Tvrtko
This conversion yields many new prdbg callsites:
dyndbg: 195 debug prints in module drm_kms_helper
dyndbg: 298 debug prints in module drm
dyndbg: 1630 debug prints in module i915
dyndbg: ~3500 debug prints in module amdgpu
CONFIG_DRM_USE_DYNAMIC_DEBUG enables this, and is available if
CONFIG_DYNAMIC_DEBUG or CONFIG_DYNAMIC_DEBUG_CORE is chosen, and if
CONFIG_JUMP_LABEL is enabled; this because its required to get the
promised optimizations.
The "basic" -> "dyndbg" switchover is layered into the macro scheme
A. A "prefix" version of DRM_UT_<CATs> map, named DRM_DBG_CAT_<CATs>
"basic": DRM_DBG_CAT_<CATs> <=== DRM_UT_<CATs>. Identity map.
"dyndbg":
#define DRM_DBG_CAT_KMS "drm:kms: "
#define DRM_DBG_CAT_PRIME "drm:prime: "
#define DRM_DBG_CAT_ATOMIC "drm:atomic: "
In v3, had older name, DRM_DBG_CLASS_<CATs> was countered, I had
agreed, but this seems better still; CATEGORY is already DRM's
term-of-art, and adding a near-synonym 'CLASS' only adds ambiguity.
DRM_UT_* are preserved, since theyre used elsewhere. We can probably
reduce their use further, but thats a separate thing.
B. drm_dev_dbg() & drm_debug() are interposed with macros
basic: forward to renamed fn, with args preserved
enabled: redirect to pr_debug, dev_dbg, with CATEGORY format catenated
This is where drm_debug_enabled() is avoided. The prefix is prepended
at compile-time, no category at runtime.
C. API[1] uses DRM_DBG_CAT_<CAT>s
these already use (B), now they use (A) too, to get the correct token
type for "basic" and "dyndbg" configs.
D. use DEFINE_DYNAMIC_DEBUG_CATEGORIES()
This defines the map using DRM_CAT_<CAT>s, and creates the /sysfs
bitmap to control those categories.
NOTES:
Because the dyndbg callback is watching __drm_debug, it is coherent
with drm_debug_enabled() and its remaining users; the switchover
should be transparent.
Code Review is expected to catch the lack of correspondence between
bit=>prefix definitions (the selector) and the prefixes used in the
API[1] layer above pr_debug()
I've coded the search-prefixes/categories with a trailing space, which
excludes any sub-categories added later. This convention protects any
"drm:atomic:fail:" callsites from getting stomped on by `echo 0 > debug`.
Other categories could differ, but we need some default.
Dyndbg requires that the prefix be in the compiled-in format string;
run-time prefixing evades callsite selection by category.
pr_debug("%s: ...", __func__, ...) // not ideal
With "lineno X" in a query, its possible to enable single callsites,
but it is tedious, and useless in a category context.
Unfortunately __func__ is not a macro, and cannot be catenated at
preprocess/compile time.
Signed-off-by: Jim Cromie <jim.cromie@xxxxxxxxx>
---
v5:
. use DEFINE_DYNAMIC_DEBUG_CATEGORIES in drm_print.c
. s/DRM_DBG_CLASS_/DRM_DBG_CAT_/ - dont need another term
. default=y in KBuild entry - per @DanVet
. move some commit-log prose to dyndbg commit
. add-prototyes to (param_get/set)_dyndbg
. more wrinkles found by <lkp@xxxxxxxxx>
. relocate ratelimit chunk from elsewhere
v6:
. add kernel doc
. fix cpp paste, drop '#'
v7:
. change __drm_debug to long, to fit with DEFINE_DYNAMIC_DEBUG_CATEGORIES
. add -DDYNAMIC_DEBUG_MODULE to ccflags if DRM_USE_DYNAMIC_DEBUG
---
drivers/gpu/drm/Kconfig | 13 ++++
drivers/gpu/drm/Makefile | 3 +
drivers/gpu/drm/drm_print.c | 53 +++++++++----
include/drm/drm_print.h | 144 ++++++++++++++++++++++++++++--------
4 files changed, 166 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 7ff89690a976..97e38d86fd27 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -57,6 +57,19 @@ config DRM_DEBUG_MM
If in doubt, say "N".
+config DRM_USE_DYNAMIC_DEBUG
+ bool "use dynamic debug to implement drm.debug"
+ default y
+ depends on DRM
+ depends on DYNAMIC_DEBUG || DYNAMIC_DEBUG_CORE
+ depends on JUMP_LABEL
+ help
+ The "basic" drm.debug facility does a lot of unlikely
+ bit-field tests at runtime; while cheap individually, the
+ cost accumulates. DYNAMIC_DEBUG patches pr_debug()s in/out
+ of the running kernel, so avoids those bit-test overheads,
+ and is therefore recommended.
+
config DRM_DEBUG_SELFTEST
tristate "kselftests for DRM"
depends on DRM
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index a118692a6df7..1809329654b3 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -20,6 +20,9 @@ drm-y := drm_aperture.o drm_auth.o drm_cache.o \
drm_client_modeset.o drm_atomic_uapi.o drm_hdcp.o \
drm_managed.o drm_vblank_work.o
+#ifdef CONFIG_DRM_USE_DYNAMIC_DEBUG
+ccflags-y += -DDYNAMIC_DEBUG_MODULE
+#endif
drm-$(CONFIG_DRM_LEGACY) += drm_agpsupport.o drm_bufs.o drm_context.o drm_dma.o \
drm_legacy_misc.o drm_lock.o drm_memory.o drm_scatter.o \
drm_vm.o
diff --git a/drivers/gpu/drm/drm_print.c b/drivers/gpu/drm/drm_print.c
index 111b932cf2a9..df2e10754c41 100644
--- a/drivers/gpu/drm/drm_print.c
+++ b/drivers/gpu/drm/drm_print.c
@@ -28,6 +28,7 @@
#include <stdarg.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
@@ -40,19 +41,39 @@
* __drm_debug: Enable debug output.
* Bitmask of DRM_UT_x. See include/drm/drm_print.h for details.
*/
-unsigned int __drm_debug;
+unsigned long __drm_debug;
EXPORT_SYMBOL(__drm_debug);
-MODULE_PARM_DESC(debug, "Enable debug output, where each bit enables a debug category.\n"
-"\t\tBit 0 (0x01) will enable CORE messages (drm core code)\n"
-"\t\tBit 1 (0x02) will enable DRIVER messages (drm controller code)\n"
-"\t\tBit 2 (0x04) will enable KMS messages (modesetting code)\n"
-"\t\tBit 3 (0x08) will enable PRIME messages (prime code)\n"
-"\t\tBit 4 (0x10) will enable ATOMIC messages (atomic code)\n"
-"\t\tBit 5 (0x20) will enable VBL messages (vblank code)\n"
-"\t\tBit 7 (0x80) will enable LEASE messages (leasing code)\n"
-"\t\tBit 8 (0x100) will enable DP messages (displayport code)");
-module_param_named(debug, __drm_debug, int, 0600);
+#define DRM_DEBUG_DESC \
+"Enable debug output, where each bit enables a debug category.\n" \
+"\t\tBit 0 (0x01) will enable CORE messages (drm core code)\n" \
+"\t\tBit 1 (0x02) will enable DRIVER messages (drm controller code)\n" \
+"\t\tBit 2 (0x04) will enable KMS messages (modesetting code)\n" \
+"\t\tBit 3 (0x08) will enable PRIME messages (prime code)\n" \
+"\t\tBit 4 (0x10) will enable ATOMIC messages (atomic code)\n" \
+"\t\tBit 5 (0x20) will enable VBL messages (vblank code)\n" \
+"\t\tBit 7 (0x80) will enable LEASE messages (leasing code)\n" \
+"\t\tBit 8 (0x100) will enable DP messages (displayport code)."
+
+#ifdef CONFIG_DRM_USE_DYNAMIC_DEBUG
+#include <linux/dynamic_debug.h>
+DEFINE_DYNAMIC_DEBUG_CATEGORIES(debug, __drm_debug,
+ DRM_DEBUG_DESC,
+ _DD_cat_(DRM_DBG_CAT_CORE),
+ _DD_cat_(DRM_DBG_CAT_DRIVER),
+ _DD_cat_(DRM_DBG_CAT_KMS),
+ _DD_cat_(DRM_DBG_CAT_PRIME),
+ _DD_cat_(DRM_DBG_CAT_ATOMIC),
+ _DD_cat_(DRM_DBG_CAT_VBL),
+ _DD_cat_(DRM_DBG_CAT_STATE),
+ _DD_cat_(DRM_DBG_CAT_LEASE),
+ _DD_cat_(DRM_DBG_CAT_DP),
+ _DD_cat_(DRM_DBG_CAT_DRMRES));
+
+#else
+MODULE_PARM_DESC(debug, DRM_DEBUG_DESC);
+module_param_named(debug, __drm_debug, ulong, 0600);
+#endif
void __drm_puts_coredump(struct drm_printer *p, const char *str)
{
@@ -256,8 +277,8 @@ void drm_dev_printk(const struct device *dev, const char *level,
}
EXPORT_SYMBOL(drm_dev_printk);
-void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
- const char *format, ...)
+void __drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
+ const char *format, ...)
{
struct va_format vaf;
va_list args;
@@ -278,9 +299,9 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
va_end(args);
}
-EXPORT_SYMBOL(drm_dev_dbg);
+EXPORT_SYMBOL(__drm_dev_dbg);
-void __drm_dbg(enum drm_debug_category category, const char *format, ...)
+void ___drm_dbg(enum drm_debug_category category, const char *format, ...)
{
struct va_format vaf;
va_list args;
@@ -297,7 +318,7 @@ void __drm_dbg(enum drm_debug_category category, const char *format, ...)
va_end(args);
}
-EXPORT_SYMBOL(__drm_dbg);
+EXPORT_SYMBOL(___drm_dbg);
void __drm_err(const char *format, ...)
{
diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
index 9b66be54dd16..973443040561 100644
--- a/include/drm/drm_print.h
+++ b/include/drm/drm_print.h
@@ -35,7 +35,7 @@
#include <drm/drm.h>
/* Do *not* use outside of drm_print.[ch]! */
-extern unsigned int __drm_debug;
+extern unsigned long __drm_debug;
/**
* DOC: print
@@ -252,15 +252,15 @@ static inline struct drm_printer drm_err_printer(const char *prefix)
/**
* enum drm_debug_category - The DRM debug categories
*
- * Each of the DRM debug logging macros use a specific category, and the logging
- * is filtered by the drm.debug module parameter. This enum specifies the values
- * for the interface.
+ * The drm.debug logging API[1] has 10 enumerated categories of
+ * messages, issued by 3 families of macros: 10 drm_dbg_<CATs>, 8
+ * DRM_DEBUG_<CATs>, and 3 DRM_DEV_DEBUG_<CATs>.
*
* Each DRM_DEBUG_<CATEGORY> macro logs to DRM_UT_<CATEGORY> category, except
* DRM_DEBUG() logs to DRM_UT_CORE.
*
- * Enabling verbose debug messages is done through the drm.debug parameter, each
- * category being enabled by a bit:
+ * Enabling categories of debug messages is done through the drm.debug
+ * parameter, each category being enabled by a bit:
*
* - drm.debug=0x1 will enable CORE messages
* - drm.debug=0x2 will enable DRIVER messages
@@ -319,6 +319,86 @@ enum drm_debug_category {
DRM_UT_DRMRES = 0x200,
};
+/**
+ * DOC: DRM_USE_DYNAMIC_DEBUG - using dyndbg in drm.debug
+ *
+ * In the "basic" drm.debug implementation outlined above, each time a
+ * drm-debug API[1] call is executed, drm_debug_enabled(cat) tests
+ * drm.debug vs cat before printing.
+ *
+ * DYNAMIC_DEBUG (aka: dyndbg) patches pr_debug()s in^out of the
+ * running kernel, so it can avoid drm_debug_enabled() and skip lots
+ * of unlikely bit tests.
+ *
+ * dyndbg has no concept of category, but we can prepend a
+ * class-prefix string: "drm:core: ", "drm:kms: ", "drm:driver: " etc,
+ * to pr_debug's format (at compile time).
+ *
+ * Then control the category
+ * `echo module drm format "^drm:core: " +p > control`
+ * `dynamic_debug_exec_queries("format '^drm:core: ' +p", "drm");`
+ *
+ * To do this for "basic" | "dyndbg", adaptation adds some macro indirection:
+ *
+ * 0. use dyndbg support to define the bits => prefixes map, attach callback.
+ *
+ * DYNDBG_BITMAP_DESC(debug, __drm_debug,
+ * "drm.debug - overview",
+ * { "drm:core:", "enable CORE debug messages" },
+ * { "drm:kms:", "enable KMS debug messages" }, ...);
+ *
+ * 1. DRM_DBG_CAT_<CAT>
+ *
+ * This set of symbols replaces DRM_UT_<CAT> in the drm-debug API; it
+ * is either a copy of DRM_UT_<CAT>, or the class-prefix strings.
+ *
+ * 2. drm_dev_dbg & drm_debug are called by drm.debug API
+ *
+ * These are now macros, either forwarding to renamed functions, or
+ * prepending the class string to the format, and invoking pr_debug
+ * directly. Since the API is all macros, dyndbg remembers
+ * per-pr_debug: module,file,func,line,format and uses that to find
+ * and enable them.
+ */
+#if !defined(CONFIG_DRM_USE_DYNAMIC_DEBUG)
+
+#define __drm_dbg(cls, fmt, ...) \
+ ___drm_dbg(cls, fmt, ##__VA_ARGS__)
+#define drm_dev_dbg(dev, cls, fmt, ...) \
+ __drm_dev_dbg(dev, cls, fmt, ##__VA_ARGS__)
+
+#define DRM_DBG_CAT_CORE DRM_UT_CORE
+#define DRM_DBG_CAT_DRIVER DRM_UT_DRIVER
+#define DRM_DBG_CAT_KMS DRM_UT_KMS
+#define DRM_DBG_CAT_PRIME DRM_UT_PRIME
+#define DRM_DBG_CAT_ATOMIC DRM_UT_ATOMIC
+#define DRM_DBG_CAT_VBL DRM_UT_VBL
+#define DRM_DBG_CAT_STATE DRM_UT_STATE
+#define DRM_DBG_CAT_LEASE DRM_UT_LEASE
+#define DRM_DBG_CAT_DP DRM_UT_DP
+#define DRM_DBG_CAT_DRMRES DRM_UT_DRMRES
+
+#else /* CONFIG_DRM_USE_DYNAMIC_DEBUG */
+
+/* join prefix+format in cpp so dyndbg can see it */
+#define __drm_dbg(cls, fmt, ...) \
+ pr_debug(cls fmt, ##__VA_ARGS__)
+#define drm_dev_dbg(dev, cls, fmt, ...) \
+ dev_dbg(dev, cls fmt, ##__VA_ARGS__)
+
+#define DRM_DBG_CAT_CORE "drm:core: "
+#define DRM_DBG_CAT_DRIVER "drm:drvr: "
+#define DRM_DBG_CAT_KMS "drm:kms: "
+#define DRM_DBG_CAT_PRIME "drm:prime: "
+#define DRM_DBG_CAT_ATOMIC "drm:atomic: "
+#define DRM_DBG_CAT_VBL "drm:vbl: "
+#define DRM_DBG_CAT_STATE "drm:state: "
+#define DRM_DBG_CAT_LEASE "drm:lease: "
+#define DRM_DBG_CAT_DP "drm:dp: "
+#define DRM_DBG_CAT_DRMRES "drm:res: " /* not in MODULE_PARM_DESC */
+
+#endif /* CONFIG_DRM_USE_DYNAMIC_DEBUG */
+
static inline bool drm_debug_enabled(enum drm_debug_category category)
{
return unlikely(__drm_debug & category);
@@ -334,8 +414,8 @@ __printf(3, 4)
void drm_dev_printk(const struct device *dev, const char *level,
const char *format, ...);
__printf(3, 4)
-void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
- const char *format, ...);
+void __drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
+ const char *format, ...);
/**
* DRM_DEV_ERROR() - Error output.
@@ -383,7 +463,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
* @fmt: printf() like format string.
*/
#define DRM_DEV_DEBUG(dev, fmt, ...) \
- drm_dev_dbg(dev, DRM_UT_CORE, fmt, ##__VA_ARGS__)
+ drm_dev_dbg(dev, DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__)
/**
* DRM_DEV_DEBUG_DRIVER() - Debug output for vendor specific part of the driver
*
@@ -391,7 +471,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
* @fmt: printf() like format string.
*/
#define DRM_DEV_DEBUG_DRIVER(dev, fmt, ...) \
- drm_dev_dbg(dev, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
+ drm_dev_dbg(dev, DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__)
/**
* DRM_DEV_DEBUG_KMS() - Debug output for modesetting code
*
@@ -399,7 +479,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
* @fmt: printf() like format string.
*/
#define DRM_DEV_DEBUG_KMS(dev, fmt, ...) \
- drm_dev_dbg(dev, DRM_UT_KMS, fmt, ##__VA_ARGS__)
+ drm_dev_dbg(dev, DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__)
/*
* struct drm_device based logging
@@ -443,25 +523,25 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
#define drm_dbg_core(drm, fmt, ...) \
- drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_CORE, fmt, ##__VA_ARGS__)
+ drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__)
#define drm_dbg(drm, fmt, ...) \
- drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
+ drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__)
#define drm_dbg_kms(drm, fmt, ...) \
- drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_KMS, fmt, ##__VA_ARGS__)
+ drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__)
#define drm_dbg_prime(drm, fmt, ...) \
- drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_PRIME, fmt, ##__VA_ARGS__)
+ drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_PRIME, fmt, ##__VA_ARGS__)
#define drm_dbg_atomic(drm, fmt, ...) \
- drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_ATOMIC, fmt, ##__VA_ARGS__)
+ drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_ATOMIC, fmt, ##__VA_ARGS__)
#define drm_dbg_vbl(drm, fmt, ...) \
- drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_VBL, fmt, ##__VA_ARGS__)
+ drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_VBL, fmt, ##__VA_ARGS__)
#define drm_dbg_state(drm, fmt, ...) \
- drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_STATE, fmt, ##__VA_ARGS__)
+ drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_STATE, fmt, ##__VA_ARGS__)
#define drm_dbg_lease(drm, fmt, ...) \
- drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_LEASE, fmt, ##__VA_ARGS__)
+ drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_LEASE, fmt, ##__VA_ARGS__)
#define drm_dbg_dp(drm, fmt, ...) \
- drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DP, fmt, ##__VA_ARGS__)
+ drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DP, fmt, ##__VA_ARGS__)
#define drm_dbg_drmres(drm, fmt, ...) \
- drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DRMRES, fmt, ##__VA_ARGS__)
+ drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DRMRES, fmt, ##__VA_ARGS__)
/*
@@ -471,7 +551,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
*/
__printf(2, 3)
-void __drm_dbg(enum drm_debug_category category, const char *format, ...);
+void ___drm_dbg(enum drm_debug_category category, const char *format, ...);
__printf(1, 2)
void __drm_err(const char *format, ...);
@@ -500,29 +580,30 @@ void __drm_err(const char *format, ...);
#define DRM_ERROR_RATELIMITED(fmt, ...) \
DRM_DEV_ERROR_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
+
#define DRM_DEBUG(fmt, ...) \
- __drm_dbg(DRM_UT_CORE, fmt, ##__VA_ARGS__)
+ __drm_dbg(DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_DRIVER(fmt, ...) \
- __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
+ __drm_dbg(DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_KMS(fmt, ...) \
- __drm_dbg(DRM_UT_KMS, fmt, ##__VA_ARGS__)
+ __drm_dbg(DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_PRIME(fmt, ...) \
- __drm_dbg(DRM_UT_PRIME, fmt, ##__VA_ARGS__)
+ __drm_dbg(DRM_DBG_CAT_PRIME, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_ATOMIC(fmt, ...) \
- __drm_dbg(DRM_UT_ATOMIC, fmt, ##__VA_ARGS__)
+ __drm_dbg(DRM_DBG_CAT_ATOMIC, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_VBL(fmt, ...) \
- __drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__)
+ __drm_dbg(DRM_DBG_CAT_VBL, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_LEASE(fmt, ...) \
- __drm_dbg(DRM_UT_LEASE, fmt, ##__VA_ARGS__)
+ __drm_dbg(DRM_DBG_CAT_LEASE, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_DP(fmt, ...) \
- __drm_dbg(DRM_UT_DP, fmt, ## __VA_ARGS__)
+ __drm_dbg(DRM_DBG_CAT_DP, fmt, ## __VA_ARGS__)
#define __DRM_DEFINE_DBG_RATELIMITED(category, drm, fmt, ...) \
({ \
@@ -530,7 +611,8 @@ void __drm_err(const char *format, ...);
const struct drm_device *drm_ = (drm); \
\
if (drm_debug_enabled(DRM_UT_ ## category) && __ratelimit(&rs_)) \
- drm_dev_printk(drm_ ? drm_->dev : NULL, KERN_DEBUG, fmt, ## __VA_ARGS__); \
+ drm_dev_dbg((drm_) ? (drm_)->dev : NULL, \
+ DRM_DBG_CAT_ ## category, fmt, ##__VA_ARGS__); \
})
#define drm_dbg_kms_ratelimited(drm, fmt, ...) \