Re: [PATCH] drm/panel: k101-im2ba02: Make use of the helper function dev_err_probe()

[Icenowy Zheng]

在 2021-09-16星期四的 18:42 +0800，Cai Huoqing写道：
> When possible use dev_err_probe help to properly deal with the
> PROBE_DEFER error, the benefit is that DEFER issue will be logged
> in the devices_deferred debugfs file.
> And using dev_err_probe() can reduce code size, and the error value
> gets printed.
> 
> Signed-off-by: Cai Huoqing <caihuoqing@xxxxxxxxx>

Looks good to me, and thanks for pointing out this helper.

Acked-by: Icenowy Zheng <icenowy@xxxxxxx>

> ---
>  drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c | 13 +++++--------
>  1 file changed, 5 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
> b/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
> index 2a602aee61c3..cb0bb3076099 100644
> --- a/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
> +++ b/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
> @@ -456,16 +456,13 @@ static int k101_im2ba02_dsi_probe(struct
> mipi_dsi_device *dsi)
>  
>         ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx-
> >supplies),
>                                       ctx->supplies);
> -       if (ret < 0) {
> -               dev_err(&dsi->dev, "Couldn't get regulators\n");
> -               return ret;
> -       }
> +       if (ret < 0)
> +               return dev_err_probe(&dsi->dev, ret, "Couldn't get
> regulators\n");
>  
>         ctx->reset = devm_gpiod_get(&dsi->dev, "reset",
> GPIOD_OUT_LOW);
> -       if (IS_ERR(ctx->reset)) {
> -               dev_err(&dsi->dev, "Couldn't get our reset GPIO\n");
> -               return PTR_ERR(ctx->reset);
> -       }
> +       if (IS_ERR(ctx->reset))
> +               return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset),
> +                                    "Couldn't get our reset
> GPIO\n");
>  
>         drm_panel_init(&ctx->panel, &dsi->dev, &k101_im2ba02_funcs,
>                        DRM_MODE_CONNECTOR_DSI);