[PATCH 5.10 111/122] net: dsa: b53: Fix IMP port setup on BCM5301x

From: Greg Kroah-Hartman
Date: Mon Sep 20 2021 - 14:39:41 EST


From: Rafał Miłecki <rafal@xxxxxxxxxx>

[ Upstream commit 63f8428b4077de3664eb0b252393c839b0b293ec ]

Broadcom's b53 switches have one IMP (Inband Management Port) that needs
to be programmed using its own designed register. IMP port may be
different than CPU port - especially on devices with multiple CPU ports.

For that reason it's required to explicitly note IMP port index and
check for it when choosing a register to use.

This commit fixes BCM5301x support. Those switches use CPU port 5 while
their IMP port is 8. Before this patch b53 was trying to program port 5
with B53_PORT_OVERRIDE_CTRL instead of B53_GMII_PORT_OVERRIDE_CTRL(5).

It may be possible to also replace "cpu_port" usages with
dsa_is_cpu_port() but that is out of the scope of thix BCM5301x fix.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/dsa/b53/b53_common.c | 27 ++++++++++++++++++++++++---
drivers/net/dsa/b53/b53_priv.h | 1 +
2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 54558f47b633..d3b37cebcfde 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1083,7 +1083,7 @@ static void b53_force_link(struct b53_device *dev, int port, int link)
u8 reg, val, off;

/* Override the port settings */
- if (port == dev->cpu_port) {
+ if (port == dev->imp_port) {
off = B53_PORT_OVERRIDE_CTRL;
val = PORT_OVERRIDE_EN;
} else {
@@ -1107,7 +1107,7 @@ static void b53_force_port_config(struct b53_device *dev, int port,
u8 reg, val, off;

/* Override the port settings */
- if (port == dev->cpu_port) {
+ if (port == dev->imp_port) {
off = B53_PORT_OVERRIDE_CTRL;
val = PORT_OVERRIDE_EN;
} else {
@@ -1175,7 +1175,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
b53_force_link(dev, port, phydev->link);

if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
- if (port == 8)
+ if (port == dev->imp_port)
off = B53_RGMII_CTRL_IMP;
else
off = B53_RGMII_CTRL_P(port);
@@ -2238,6 +2238,7 @@ struct b53_chip_data {
const char *dev_name;
u16 vlans;
u16 enabled_ports;
+ u8 imp_port;
u8 cpu_port;
u8 vta_regs[3];
u8 arl_bins;
@@ -2262,6 +2263,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 2,
.arl_buckets = 1024,
+ .imp_port = 5,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
@@ -2272,6 +2274,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 2,
.arl_buckets = 1024,
+ .imp_port = 5,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
@@ -2282,6 +2285,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2295,6 +2299,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2308,6 +2313,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2321,6 +2327,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x7f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2335,6 +2342,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 1024,
.vta_regs = B53_VTA_REGS,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
@@ -2347,6 +2355,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0xff,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2360,6 +2369,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2373,6 +2383,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0, /* pdata must provide them */
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_63XX,
.duplex_reg = B53_DUPLEX_STAT_63XX,
@@ -2386,6 +2397,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2399,6 +2411,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1bf,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2412,6 +2425,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1bf,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2425,6 +2439,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2438,6 +2453,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2451,6 +2467,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2464,6 +2481,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x103,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2477,6 +2495,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2490,6 +2509,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 256,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2515,6 +2535,7 @@ static int b53_switch_init(struct b53_device *dev)
dev->vta_regs[1] = chip->vta_regs[1];
dev->vta_regs[2] = chip->vta_regs[2];
dev->jumbo_pm_reg = chip->jumbo_pm_reg;
+ dev->imp_port = chip->imp_port;
dev->cpu_port = chip->cpu_port;
dev->num_vlans = chip->vlans;
dev->num_arl_bins = chip->arl_bins;
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 7c67409bb186..bdb2ade7ad62 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -122,6 +122,7 @@ struct b53_device {

/* used ports mask */
u16 enabled_ports;
+ unsigned int imp_port;
unsigned int cpu_port;

/* connect specific data */
--
2.30.2