Re: [PATCH] arm64: dts: marvell: add Globalscale MOCHAbin

[Andrew Lunn]

> +	/* 88E6141 Topaz switch */
> +	switch: switch@3 {
> +		compatible = "marvell,mv88e6085";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reg = <3>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&cp0_switch_pins>;
> +		reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
> +
> +		interrupt-parent = <&cp0_gpio1>;
> +		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;

The switch interrupt is a level interrupt, not an edge interrupt.

    Andrew