Re: [PATCH 1/6] clk: samsung: Enable bus clock on init
From: Sylwester Nawrocki
Date: Sat Oct 09 2021 - 14:49:48 EST
On 06.10.2021 13:18, Sam Protsenko wrote:
On Wed, 15 Sept 2021 at 15:51, Sylwester Nawrocki
<s.nawrocki@xxxxxxxxxxx> wrote:
On 14.09.2021 17:56, Sam Protsenko wrote:
By default if bus clock has no users its "enable count" value is 0. It
might be actually running if it's already enabled in bootloader, but
then in some cases it can be disabled by mistake. For example, such case
was observed when dw_mci_probe() enabled bus clock, then failed to do
something and disabled that bus clock on error path. After that even
attempt to read the 'clk_summary' file in DebugFS freezed forever, as
CMU bus clock ended up being disabled and it wasn't possible to access
CMU registers anymore.
To avoid such cases, CMU driver must increment the ref count for that
bus clock by running clk_prepare_enable(). There is already existing
'.clk_name' field in struct samsung_cmu_info, exactly for that reason.
It was added in commit 523d3de41f02 ("clk: samsung: exynos5433: Add
support for runtime PM"). But the clock is actually enabled only in
Exynos5433 clock driver. Let's mimic what is done there in generic
samsung_cmu_register_one() function, so other drivers can benefit from
that `.clk_name' field. As was described above, it might be helpful not
only for PM reasons, but also to prevent possible erroneous clock gating
on error paths.
diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
index 1949ae7851b2..da65149fa502 100644
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
@@ -357,6 +357,19 @@ struct samsung_clk_provider * __init samsung_cmu_register_one(
ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
+ /* Keep bus clock running, so it's possible to access CMU registers */
+ if (cmu->clk_name) {
+ struct clk *bus_clk;
+
+ bus_clk = __clk_lookup(cmu->clk_name);
+ if (bus_clk) {
+ clk_prepare_enable(bus_clk);
+ } else {
+ pr_err("%s: could not find bus clock %s\n", __func__,
+ cmu->clk_name);
+ }
+ }
+
if (cmu->pll_clks)
samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
reg_base);
I would suggest to implement runtime PM ops in your driver instead, even though
those would initially only contain single clk enable/disable. Things like
the clk_summary will work then thanks to runtime PM support in the clk core
(see clk_pm_runtime_* calls).
Can you please elaborate more? I don't see how adding PM ops would
solve the problem I'm trying to address, which is keeping core bus
clocks always running. For example, I'm looking at clk-exynos5433.c
I missed the fact that there is usually a specific SFR sequence required
for disabling the CMU root (and APB) clock. We would need to figure out what
an exact sequence is for each CMU, similarly as is done in clk-exynos5433,
then keeping the CMU source clock always enabled shouldn't be required.
I'm fine with just enabling the APB clocks in probe() until proper CMU
suspend/resume support is added.
implementation, which enables bus clock on resume path:
<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>
static int __maybe_unused exynos5433_cmu_resume(struct device *dev)
{
...
clk_prepare_enable(data->clk);
...
}
<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>
But that resume operation won't be called on driver init, because it
configures runtime PM like this:
<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>
static int __init exynos5433_cmu_probe(struct platform_device *pdev)
{
...
/*
* Enable runtime PM here to allow the clock core using runtime PM
* for the registered clocks. Additionally, we increase the runtime
* PM usage count before registering the clocks, to prevent the
* clock core from runtime suspending the device.
*/
pm_runtime_get_noresume(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
...
pm_runtime_put_sync(dev);
...
}
<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>
When I tried to implement the same in my driver, only suspend function
is called during kernel startup.
I think some of the clocks supplied by a CMU need to be in use
(e.g. clk_prepare()) to get the resume op in the CMU driver invoked.
Anyway, even clk-exynos5433.c driver (which also implements PM ops)
does the same for core bus clocks:
<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>
static int __init exynos5433_cmu_probe(struct platform_device *pdev)
{
...
if (info->clk_name)
data->clk = clk_get(dev, info->clk_name);
clk_prepare_enable(data->clk);
...
}
<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>
Enabling the clock corresponds with the pm_runtime_set_active() call you
pointed out above. Such pattern also ensures the clock will stay enabled
when CONFIG_PM_RUNTIME is disabled.
So it looks like separate feature to me. Not sure how that can be
implemented only by adding PM ops. Also, my board lacks PM support in
upstream kernel right now, so I probably won't be able to test PM ops
if I implement those, that's why I decided to skip it for now.
It is not really a separate feature, I think having the clocks permanently
enabled is not something we would like to end up with. It would need to be
revisited anyway when adding the power domains support.
We could also make common runtime PM suspend/resume helpers but I wouldn't
focus on that too much now, it could well be done later.
And please avoid introducing new __clk_lookup() calls.
The reason I used __clk_lookup() is that it's the only API that works
in that case. I tried to use clk_get(), but we lack 'struct dev'
pointer in samsung_cmu_register_one(), so when providing dev=NULL into
clk_get() it fails to get the clock. That's happening because
LIST_HEAD(clocks) is probably empty in clkdev.c. So this chain fails:
<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>
clk_get() // dev = NULL
v
__clk_get_sys()
v
clk_find_hw()
v
clk_find() // returns 0, because LIST_HEAD(clocks) is empty
<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>
I saw your patches which get rid of __clk_lookup() usage by accessing
ctx->clk_data.hws[], but that requires using clock index, not name.
'struct samsung_cmu_info' only stores bus clock name (.clk_name),
which seems logical to me, so we can't get away from using
__clk_lookup() in that case without refactoring 'struct
samsung_cmu_info' first.
You need device pointer to get the CMU input clocks as specified in DT.
clk_get with NULL device pointer and global clock name will now only work
on Samsung non-DT platforms, for DT-only SoCs we don't register clkdev
entries at all (see samsung_clk_register_alias()).
All that said, I suggest next: I'll pull the code from this patch into
clk-exynos850.c, adding platform_driver registration there, so I can
actually use clk_get() for getting bus clocks. As for PM ops, I'd like
to skip it for now, if you don't mind, as I can't fully test those.
Sounds good to me, thank you for working on this.
--
Regards,
Sylwester