Re: [PATCH v1 2/3] phy/rockchip: add naneng combo phy for RK3568

[Nicolas Frattaroli]

On Donnerstag, 26. August 2021 14:38:43 CEST Yifeng Zhao wrote:
> This patch implements a combo phy driver for Rockchip SoCs
> with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy,
> sata-phy or sgmii-phy.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@xxxxxxxxxxxxxx>
> ---
> [...]
> +static int rockchip_combphy_pcie_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
pcie\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_usb3_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
usb3\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_sata_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
sata\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_sgmii_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
sgmii\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv)
> +{
> +	switch (priv->mode) {
> +	case PHY_TYPE_PCIE:
> +		rockchip_combphy_pcie_init(priv);
> +		break;
> +	case PHY_TYPE_USB3:
> +		rockchip_combphy_usb3_init(priv);
> +		break;
> +	case PHY_TYPE_SATA:
> +		rockchip_combphy_sata_init(priv);
> +		break;
> +	case PHY_TYPE_SGMII:
> +	case PHY_TYPE_QSGMII:
> +		return rockchip_combphy_sgmii_init(priv);
> +	default:
> +		dev_err(priv->dev, "incompatible PHY type\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}

All of the _init functions appear to be the same except for the error
string.

I think it would be better to just have the init done in _set_mode,
and then use the switch case statement to show the right error
message on if (ret).

> [...]
> +
> +static int rockchip_combphy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_combphy_priv *priv;
> +	const struct rockchip_combphy_cfg *phy_cfg;
> +	struct resource *res;
> +	int ret;
> +
> +	phy_cfg = of_device_get_match_data(dev);
> +	if (!phy_cfg) {
> +		dev_err(dev, "No OF match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->mmio = devm_ioremap_resource(dev, res);

I think devm_platform_get_and_ioremap_resource is preferred here,
using it also means you can get rid of res.

> +	if (IS_ERR(priv->mmio)) {
> +		ret = PTR_ERR(priv->mmio);
> +		return ret;
> +	}
> +
> [...]

Regards,
Nicolas Frattaroli