[PATCH v4 10/20] arm64/dts: qcom: sdm845: Use RPMH_CE_CLK macro directly

[Bhupesh Sharma]

In commit 3e482859f1ef ("dts: qcom: sdm845: Add dt entries
to support crypto engine."), we decided to use the value indicated
by constant RPMH_CE_CLK rather than using it directly.

Now that the same RPMH clock value might be used for other
SoCs (in addition to sdm845), let's use the constant
RPMH_CE_CLK to make sure that this dtsi is compatible with the
other qcom ones.

Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Reviewed-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 72ec48c4e03c..a301ca7664c1 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2316,7 +2316,7 @@ cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0 0x01dc4000 0 0x24000>;
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rpmhcc 15>;
+			clocks = <&rpmhcc RPMH_CE_CLK>;
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
@@ -2332,7 +2332,7 @@ crypto: crypto@1dfa000 {
 			reg = <0 0x01dfa000 0 0x6000>;
 			clocks = <&gcc GCC_CE1_AHB_CLK>,
 				 <&gcc GCC_CE1_AHB_CLK>,
-				 <&rpmhcc 15>;
+				 <&rpmhcc RPMH_CE_CLK>;
 			clock-names = "iface", "bus", "core";
 			dmas = <&cryptobam 6>, <&cryptobam 7>;
 			dma-names = "rx", "tx";
-- 
2.31.1