Re: [PATCH v3 0/3] ARM: prepare and add netgear gs110emx support

[Gregory CLEMENT]

Hello Marcel Ziswiler,

> Cleanup mvebu_v7_defconfig and then add support for the Netgear
> GS110EMX which is an 8 port Gigabit switch with two additional
> Multi-Gig ports. An 88E6390X switch sits at its core connecting to two
> 88X3310P 10G PHYs while the control plane is handled by an 88F6811
> Armada 381 SoC.
>
> Changes in v3:
> - Got rid of unused 3.3 volt regulator as suggested by Andrew.
> - Got rid of partitioning comment.
> - Added switch interrupt GPIO configuration.
>
> Changes in v2:
> - Add Andrew's reviewed-by tag.
> - Add Andrew's reviewed-by tag.
> - Send previous first patch separately to netdev mailing list as
>   suggested by Andrew.
> - Fix numbering of the PHY labels as suggested by Andrew.
>
> Marcel Ziswiler (3):
>   ARM: mvebu_v7_defconfig: enable mtd physmap
>   ARM: mvebu_v7_defconfig: rebuild default configuration

Both applied on mvebu/defconfig

>   ARM: dts: mvebu: add device tree for netgear gs110emx switch

Applied on mvebu/dt

Thanks,

Gregory

>
>  arch/arm/boot/dts/Makefile                    |   1 +
>  .../boot/dts/armada-381-netgear-gs110emx.dts  | 295 ++++++++++++++++++
>  arch/arm/configs/mvebu_v7_defconfig           |  18 +-
>  3 files changed, 304 insertions(+), 10 deletions(-)
>  create mode 100644 arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
>
> -- 
> 2.26.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com