Re: [PATCH 6/6] media: aspeed: richer debugfs

[Paul Menzel]

Dear Jammy,


Am 14.10.21 um 08:54 schrieb Paul Menzel:

> Am 14.10.21 um 05:48 schrieb Jammy Huang:

> media: aspeed: richer debugfs

It’d be great if you used a statement by adding a verb in imperative 
mood [1]. Maybe:

> Extend debug message

or

> Add more debug log messages

> > updated as below:
> >
> > Caputre:
>
> Capture
>
> >    Mode                : Direct fetch
> >    VGA bpp mode        : 32
> >    Signal              : Unlock
> >    Width               : 1920
> >    Height              : 1080
> >    FRC                 : 30
> >
> > Compression:
> >    Format              : JPEG
> >    Subsampling         : 444
> >    Quality             : 0
> >    HQ Mode             : N/A
> >    HQ Quality          : 0
> >    Mode                : N/A
> >
> > Performance:
> >    Frame#              : 0
> >    Frame Duration(ms)  :
> >      Now               : 0
> >      Min               : 0
> >      Max               : 0
> >    FPS                 : 0
>
> Do you have output with non-zero values? ;-)
>
> On what device did you test this?
>
> > Signed-off-by: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
> > ---
> >   drivers/media/platform/aspeed-video.c | 41 +++++++++++++++++++++++++--
> >   1 file changed, 38 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/media/platform/aspeed-video.c 
> > b/drivers/media/platform/aspeed-video.c
> > index e1031fd09ac6..f2e5c49ee906 100644
> > --- a/drivers/media/platform/aspeed-video.c
> > +++ b/drivers/media/platform/aspeed-video.c
> > @@ -464,6 +464,9 @@ static const struct v4l2_dv_timings_cap 
> > aspeed_video_timings_cap = {
> >       },
> >   };
> > +static const char * const compress_mode_str[] = {"DCT Only",
> > +    "DCT VQ mix 2-color", "DCT VQ mix 4-color"};
> > +
> >   static unsigned int debug;
> >   static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420)
> > @@ -1077,8 +1080,6 @@ static void aspeed_video_set_resolution(struct 
> > aspeed_video *video)
> >   static void aspeed_video_update_regs(struct aspeed_video *video)
> >   {
> > -    static const char * const compress_mode_str[] = {"DCT Only",
> > -        "DCT VQ mix 2-color", "DCT VQ mix 4-color"};
> >       u32 comp_ctrl =    FIELD_PREP(VE_COMP_CTRL_DCT_LUM, 
> > video->jpeg_quality) |
> >           FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10) |
> >           FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode) |
> > @@ -1795,9 +1796,29 @@ static const struct vb2_ops 
> > aspeed_video_vb2_ops = {
> >   static int aspeed_video_debugfs_show(struct seq_file *s, void *data)
> >   {
> >       struct aspeed_video *v = s->private;
> > +    u32 val08;
>
> Why does `08` refer to?
>
> >       seq_puts(s, "\n");
> > +    val08 = aspeed_video_read(v, VE_CTRL);
> > +    seq_puts(s, "Caputre:\n");
> > +    if (FIELD_GET(VE_CTRL_DIRECT_FETCH, val08)) {
> > +        seq_printf(s, "  %-20s:\tDirect fetch\n", "Mode");
> > +        seq_printf(s, "  %-20s:\t%s\n", "VGA bpp mode",
> > +               FIELD_GET(VE_CTRL_INT_DE, val08) ? "16" : "32");
> > +    } else {
> > +        seq_printf(s, "  %-20s:\tSync\n", "Mode");
> > +        seq_printf(s, "  %-20s:\t%s\n", "Video source",
> > +               FIELD_GET(VE_CTRL_SOURCE, val08) ?
> > +               "external" : "internal");
> > +        seq_printf(s, "  %-20s:\t%s\n", "DE source",
> > +               FIELD_GET(VE_CTRL_INT_DE, val08) ?
> > +               "internal" : "external");
> > +        seq_printf(s, "  %-20s:\t%s\n", "Cursor overlay",
> > +               FIELD_GET(VE_CTRL_AUTO_OR_CURSOR, val08) ?
> > +               "Without" : "With");
> > +    }
> > +
> >       seq_printf(s, "  %-20s:\t%s\n", "Signal",
> >              v->v4l2_input_status ? "Unlock" : "Lock");
> >       seq_printf(s, "  %-20s:\t%d\n", "Width", v->pix_fmt.width);
> > @@ -1806,6 +1827,21 @@ static int aspeed_video_debugfs_show(struct 
> > seq_file *s, void *data)
> >       seq_puts(s, "\n");
> > +    seq_puts(s, "Compression:\n");
> > +    seq_printf(s, "  %-20s:\t%s\n", "Format",
> > +           v->partial_jpeg ? "Aspeed" : "JPEG");
> > +    seq_printf(s, "  %-20s:\t%s\n", "Subsampling",
> > +           v->yuv420 ? "420" : "444");
> > +    seq_printf(s, "  %-20s:\t%d\n", "Quality", v->jpeg_quality);
> > +    seq_printf(s, "  %-20s:\t%s\n", "HQ Mode",
> > +           v->partial_jpeg ? (v->hq_mode ? "on" : "off") : "N/A");
> > +    seq_printf(s, "  %-20s:\t%d\n", "HQ Quality", v->jpeg_hq_quality);
> > +    seq_printf(s, "  %-20s:\t%s\n", "Mode",
> > +           v->partial_jpeg ? compress_mode_str[v->compression_mode]
> > +                   : "N/A");
> > +
> > +    seq_puts(s, "\n");
> > +
> >       seq_puts(s, "Performance:\n");
> >       seq_printf(s, "  %-20s:\t%d\n", "Frame#", v->sequence);
> >       seq_printf(s, "  %-20s:\n", "Frame Duration(ms)");
>
> Remove the colon, and add a space before (?
>
> > @@ -1814,7 +1850,6 @@ static int aspeed_video_debugfs_show(struct 
> > seq_file *s, void *data)
> >       seq_printf(s, "    %-18s:\t%d\n", "Max", v->perf.duration_max);
> >       seq_printf(s, "  %-20s:\t%d\n", "FPS", 
> > 1000/(v->perf.totaltime/v->sequence));
> > -
> >       return 0;
> >   }


Kind regards,

Paul


[1]: https://chris.beams.io/posts/git-commit/