Re: [PATCH] dt-bindings: gpio: zynq: Add missing compatible strings

[Rob Herring]

On Thu, 14 Oct 2021 12:14:18 +0200, Michal Simek wrote:
> "xlnx,zynqmp-gpio-1.0", "xlnx,versal-gpio-1.0" and "xlnx,pmc-gpio-1.0"
> compatible strings were not moved to yaml format. But they were in origin
> text file.
> 
> Fixes: 45ca16072b70 ("dt-bindings: gpio: zynq: convert bindings to YAML")
> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
> ---
> 
>  Documentation/devicetree/bindings/gpio/gpio-zynq.yaml | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1540859


gpio@ff0a0000: '#address-cells', 'gpio-line-names', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dt.yaml

gpio@ff0a0000: '#address-cells', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dt.yaml
	arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dt.yaml