[PATCH v6 40/48] iio: adc: ti_am335x_adc: Fix style

From: Miquel Raynal
Date: Fri Oct 15 2021 - 04:17:52 EST


These warnings are reported by checkpatch.pl essentially.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
drivers/iio/adc/ti_am335x_adc.c | 104 ++++++++++++++++----------------
1 file changed, 52 insertions(+), 52 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 11109c84f971..496603ab7841 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -58,7 +58,7 @@ static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
}

static void tiadc_writel(struct tiadc_device *adc, unsigned int reg,
- unsigned int val)
+ unsigned int val)
{
writel(val, adc->mfd_tscadc->tscadc_base + reg);
}
@@ -73,7 +73,7 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
}

static u32 get_adc_chan_step_mask(struct tiadc_device *adc_dev,
- struct iio_chan_spec const *chan)
+ struct iio_chan_spec const *chan)
{
int i;

@@ -120,8 +120,6 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
* Channel would represent which analog input
* needs to be given to ADC to digitalize data.
*/
-
-
for (i = 0; i < adc_dev->channels; i++) {
int chan;

@@ -134,9 +132,8 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
}

if (adc_dev->step_avg[i])
- stepconfig =
- STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
- STEPCONFIG_FIFO1;
+ stepconfig = STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
+ STEPCONFIG_FIFO1;
else
stepconfig = STEPCONFIG_FIFO1;

@@ -144,10 +141,9 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
stepconfig |= STEPCONFIG_MODE_SWCNT;

tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
- stepconfig | STEPCONFIG_INP(chan) |
- STEPCONFIG_INM_ADCREFM |
- STEPCONFIG_RFP_VREFP |
- STEPCONFIG_RFM_VREFN);
+ stepconfig | STEPCONFIG_INP(chan) |
+ STEPCONFIG_INM_ADCREFM | STEPCONFIG_RFP_VREFP |
+ STEPCONFIG_RFM_VREFN);

if (adc_dev->open_delay[i] > STEPCONFIG_MAX_OPENDLY) {
dev_warn(dev, "chan %d: wrong open delay, truncated to 0x%lX\n",
@@ -162,8 +158,8 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
}

tiadc_writel(adc_dev, REG_STEPDELAY(steps),
- STEPDELAY_OPEN(adc_dev->open_delay[i]) |
- STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
+ STEPDELAY_OPEN(adc_dev->open_delay[i]) |
+ STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));

adc_dev->channel_step[i] = steps;
steps++;
@@ -188,10 +184,12 @@ static irqreturn_t tiadc_irq_h(int irq, void *private)
config = tiadc_readl(adc_dev, REG_CTRL);
config &= ~(CNTRLREG_SSENB);
tiadc_writel(adc_dev, REG_CTRL, config);
- tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
- | IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
+ tiadc_writel(adc_dev, REG_IRQSTATUS,
+ IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW |
+ IRQENB_FIFO1THRES);

- /* wait for idle state.
+ /*
+ * Wait for the idle state.
* ADC needs to finish the current conversion
* before disabling the module
*/
@@ -219,11 +217,11 @@ static irqreturn_t tiadc_worker_h(int irq, void *private)

fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
for (k = 0; k < fifo1count; k = k + i) {
- for (i = 0; i < (indio_dev->scan_bytes)/2; i++) {
+ for (i = 0; i < indio_dev->scan_bytes / 2; i++) {
read = tiadc_readl(adc_dev, REG_FIFO1);
data[i] = read & FIFOREAD_DATA_MASK;
}
- iio_push_to_buffers(indio_dev, (u8 *) data);
+ iio_push_to_buffers(indio_dev, (u8 *)data);
}

tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES);
@@ -256,6 +254,7 @@ static int tiadc_start_dma(struct iio_dev *indio_dev)
struct dma_async_tx_descriptor *desc;

dma->current_period = 0; /* We start to fill period 0 */
+
/*
* Make the fifo thresh as the multiple of total number of
* channels enabled, so make sure that cyclic DMA period
@@ -265,9 +264,10 @@ static int tiadc_start_dma(struct iio_dev *indio_dev)
*/
dma->fifo_thresh = rounddown(FIFO1_THRESHOLD + 1,
adc_dev->total_ch_enabled) - 1;
+
/* Make sure that period length is multiple of fifo thresh level */
dma->period_size = rounddown(DMA_BUFFER_SIZE / 2,
- (dma->fifo_thresh + 1) * sizeof(u16));
+ (dma->fifo_thresh + 1) * sizeof(u16));

dma->conf.src_maxburst = dma->fifo_thresh + 1;
dmaengine_slave_config(dma->chan, &dma->conf);
@@ -303,9 +303,9 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
if (ret)
return ret;

- tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
- IRQENB_FIFO1OVRRUN |
- IRQENB_FIFO1UNDRFLW));
+ tiadc_writel(adc_dev, REG_IRQCLR,
+ IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+ IRQENB_FIFO1UNDRFLW);

/* Flush FIFO. Needed in corner cases in simultaneous tsc/adc use */
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
@@ -335,8 +335,9 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev)

am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb);

- tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES
- | IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
+ tiadc_writel(adc_dev, REG_IRQSTATUS,
+ IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+ IRQENB_FIFO1UNDRFLW);

irq_enable = IRQENB_FIFO1OVRRUN;
if (!dma->chan)
@@ -352,8 +353,9 @@ static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
struct tiadc_dma *dma = &adc_dev->dma;
int fifo1count, i;

- tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
- IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
+ tiadc_writel(adc_dev, REG_IRQCLR,
+ IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+ IRQENB_FIFO1UNDRFLW);
am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
adc_dev->buffer_en_ch_steps = 0;
adc_dev->total_ch_enabled = 0;
@@ -385,12 +387,11 @@ static const struct iio_buffer_setup_ops tiadc_buffer_setup_ops = {
};

static int tiadc_iio_buffered_hardware_setup(struct device *dev,
- struct iio_dev *indio_dev,
- irqreturn_t (*pollfunc_bh)(int irq, void *p),
- irqreturn_t (*pollfunc_th)(int irq, void *p),
- int irq,
- unsigned long flags,
- const struct iio_buffer_setup_ops *setup_ops)
+ struct iio_dev *indio_dev,
+ irqreturn_t (*pollfunc_bh)(int irq, void *p),
+ irqreturn_t (*pollfunc_th)(int irq, void *p),
+ int irq, unsigned long flags,
+ const struct iio_buffer_setup_ops *setup_ops)
{
int ret;

@@ -401,7 +402,7 @@ static int tiadc_iio_buffered_hardware_setup(struct device *dev,
return ret;

return devm_request_threaded_irq(dev, irq, pollfunc_th, pollfunc_bh,
- flags, indio_dev->name, indio_dev);
+ flags, indio_dev->name, indio_dev);
}

static const char * const chan_name_ain[] = {
@@ -426,12 +427,11 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
indio_dev->num_channels = channels;
chan_array = devm_kcalloc(dev, channels, sizeof(*chan_array),
GFP_KERNEL);
- if (chan_array == NULL)
+ if (!chan_array)
return -ENOMEM;

chan = chan_array;
for (i = 0; i < channels; i++, chan++) {
-
chan->type = IIO_VOLTAGE;
chan->indexed = 1;
chan->channel = adc_dev->channel_line[i];
@@ -449,8 +449,8 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
}

static int tiadc_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2, long mask)
+ struct iio_chan_spec const *chan, int *val, int *val2,
+ long mask)
{
struct tiadc_device *adc_dev = iio_priv(indio_dev);
int i, map_val;
@@ -479,9 +479,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,

am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);

- timeout = jiffies + msecs_to_jiffies
- (IDLE_TIMEOUT * adc_dev->channels);
/* Wait for Fifo threshold interrupt */
+ timeout = jiffies + msecs_to_jiffies(IDLE_TIMEOUT * adc_dev->channels);
while (1) {
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
if (fifo1count)
@@ -493,6 +492,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
goto err_unlock;
}
}
+
map_val = adc_dev->channel_step[chan->scan_index];

/*
@@ -510,13 +510,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
if (stepid == map_val) {
read = read & FIFOREAD_DATA_MASK;
found = true;
- *val = (u16) read;
+ *val = (u16)read;
}
}
+
am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);

if (!found)
- ret = -EBUSY;
+ ret = -EBUSY;

err_unlock:
mutex_unlock(&adc_dev->fifo1_lock);
@@ -557,6 +558,7 @@ static int tiadc_request_dma(struct platform_device *pdev,
goto err;

return 0;
+
err:
dma_release_channel(dma->chan);
return -ENOMEM;
@@ -606,7 +608,7 @@ static int tiadc_probe(struct platform_device *pdev)
}

indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
- if (indio_dev == NULL) {
+ if (!indio_dev) {
dev_err(&pdev->dev, "failed to allocate iio device\n");
return -ENOMEM;
}
@@ -628,12 +630,11 @@ static int tiadc_probe(struct platform_device *pdev)
return err;

err = tiadc_iio_buffered_hardware_setup(&pdev->dev, indio_dev,
- &tiadc_worker_h,
- &tiadc_irq_h,
- adc_dev->mfd_tscadc->irq,
- IRQF_SHARED,
- &tiadc_buffer_setup_ops);
-
+ &tiadc_worker_h,
+ &tiadc_irq_h,
+ adc_dev->mfd_tscadc->irq,
+ IRQF_SHARED,
+ &tiadc_buffer_setup_ops);
if (err)
goto err_free_channels;

@@ -684,8 +685,7 @@ static int __maybe_unused tiadc_suspend(struct device *dev)

idle = tiadc_readl(adc_dev, REG_CTRL);
idle &= ~(CNTRLREG_SSENB);
- tiadc_writel(adc_dev, REG_CTRL, (idle |
- CNTRLREG_POWERDOWN));
+ tiadc_writel(adc_dev, REG_CTRL, idle | CNTRLREG_POWERDOWN);

return 0;
}
@@ -698,12 +698,12 @@ static int __maybe_unused tiadc_resume(struct device *dev)

/* Make sure ADC is powered up */
restore = tiadc_readl(adc_dev, REG_CTRL);
- restore &= ~(CNTRLREG_POWERDOWN);
+ restore &= ~CNTRLREG_POWERDOWN;
tiadc_writel(adc_dev, REG_CTRL, restore);

tiadc_step_config(indio_dev);
am335x_tsc_se_set_cache(adc_dev->mfd_tscadc,
- adc_dev->buffer_en_ch_steps);
+ adc_dev->buffer_en_ch_steps);
return 0;
}

--
2.27.0