Re: [PATCH 1/1] dt-bindings: reg-io-width for SiFive CLINT

[Jessica Clarke]

On 15 Oct 2021, at 12:54, Heinrich Schuchardt <heinrich.schuchardt@xxxxxxxxxxxxx> wrote:
> 
> On 10/15/21 12:14, Bin Meng wrote:
>> On Fri, Oct 15, 2021 at 6:09 PM Heinrich Schuchardt
>> <heinrich.schuchardt@xxxxxxxxxxxxx> wrote:
>>> 
>>> The CLINT in the T-HEAD 9xx processors do not support 64bit mmio access to
>>> the MTIMER device. The current schema does not allow to specify this.
>>> 
>>> OpenSBI currently uses a property 'clint,has-no-64bit-mmio' to indicate the
>>> restriction. Samuael Holland suggested in
>>> lib: utils/timer: Use standard property to specify 32-bit I/O
>>> https://github.com/smaeul/opensbi/commit/b95e9cf7cf93b0af16fc89204378bc59ff30008e
>>> to use "reg-io-width = <4>;" as the reg-io-width property is generally used
>>> in the devicetree schema for such a condition.
>>> 
>>> A release candidate of the ACLINT specification is available at
>>> https://github.com/riscv/riscv-aclint/releases
>>> 
>>> Add reg-io-width as optional property to the SiFive Core Local Interruptor.
>>> 
>>> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@xxxxxxxxxxxxx>
>>> ---
>>>  Documentation/devicetree/bindings/timer/sifive,clint.yaml | 7 +++++++
>>>  1 file changed, 7 insertions(+)
>>> 
>>> diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
>>> index a35952f48742..266012d887b5 100644
>>> --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
>>> +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
>>> @@ -41,6 +41,13 @@ properties:
>>>    reg:
>>>      maxItems: 1
>>> 
>>> +  reg-io-width:
>>> +    description: |
>>> +      Some CLINT implementations, e.g. on the T-HEAD 9xx, only support
>>> +      32bit access for MTIMER.
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>> +    const: 4
>> But this is not a "sifive,clint" anyway. Should there be a new
>> dt-bindings for T-Head clint variant?
> 
> I assume by new dt-bindings variant you mean: Add a new compatible string in Documentation/devicetree/bindings/timer/sifive,clint.yaml.
> 
> The vendor Debian image uses:
> compatible = "{allwinner,sun20i-d1-clint", "sifive,clint0”};

I assume Bin means to stop calling it a sifive,clint0 and instead have
something like

    "allwinner,sun20i-d1-clint", "thead,clint0"

as is being done for their non-conforming PLIC. It’s worth pointing out
that the same is true here; the SiFive CLINT supports 64-bit accesses
on RV64, so this is not compatible with a SiFive CLINT. Moreover, the
RISC-V spec was clearly written in a way that intended 64-bit accesses
to be supported for RV64, though was not completely explicit about
that, which has now been resolved (see
https://github.com/riscv/riscv-isa-manual/issues/639), so this CLINT
violates the obvious intent of the pre-1.12 privileged specs (see
Andrew’s message in the issue, which agrees with my reading).

Jess