RE: [PATCH] kcov: add KCOV_PC_RANGE to limit pc range

From: JianGen Jiao (QUIC)
Date: Mon Nov 22 2021 - 22:18:07 EST


Hi Dmitry,
Based on these info, any further comment and next action?

# Summary
* shouldn't filter inside kernel which will loose edge info (Kaipeng).
* filter start, end should be enough (Kaipeng).
* put edge info into kernel? (Kaipeng) __sanitizer_cov_trace_pc_guard might be an option? But it will loose PC info for /cover page (perhaps needs gcov), also not feasible to filter out pc guard value. (Joey)
* eBPF is for read-only purpose, not suitable to overcome kcov->area overflow (Joey).
* PC RANGE (start, end) can be used together with current cover filter (start, start+size) in syzkaller to fuzzing file or module interested (Joey).
* KCOV uniq PC is for another purpose (dropping edge info) even it also overcomes kcov->area overflow (Joey).

THX
Joey

-----Original Message-----
From: JianGen Jiao (QUIC) <quic_jiangenj@xxxxxxxxxxx>
Sent: Monday, November 22, 2021 11:25 AM
To: Kaipeng Zeng <kaipeng94@xxxxxxxxx>; Dmitry Vyukov <dvyukov@xxxxxxxxxx>
Cc: JianGen Jiao (QUIC) <quic_jiangenj@xxxxxxxxxxx>; syzkaller <syzkaller@xxxxxxxxxxxxxxxx>; andreyknvl@xxxxxxxxx; kasan-dev@xxxxxxxxxxxxxxxx; LKML <linux-kernel@xxxxxxxxxxxxxxx>; Alexander Lochmann <info@xxxxxxxxxxxxxxxxxxxxx>; Likai Ding (QUIC) <quic_likaid@xxxxxxxxxxx>; Hangbin Liu <liuhangbin@xxxxxxxxx>
Subject: RE: [PATCH] kcov: add KCOV_PC_RANGE to limit pc range

Hi Kaipeng,
> BTW, our coverage filter is for Linux/amd64 only. Seems the author needs a coverage filter on arm.

Let you know that cov filer for arm[64] is available too in syzkaller back months.

-----Original Message-----
From: Kaipeng Zeng <kaipeng94@xxxxxxxxx>
Sent: Monday, November 22, 2021 11:09 AM
To: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
Cc: JianGen Jiao (QUIC) <quic_jiangenj@xxxxxxxxxxx>; syzkaller <syzkaller@xxxxxxxxxxxxxxxx>; andreyknvl@xxxxxxxxx; kasan-dev@xxxxxxxxxxxxxxxx; LKML <linux-kernel@xxxxxxxxxxxxxxx>; Alexander Lochmann <info@xxxxxxxxxxxxxxxxxxxxx>; Likai Ding (QUIC) <quic_likaid@xxxxxxxxxxx>; Hangbin Liu <liuhangbin@xxxxxxxxx>
Subject: Re: [PATCH] kcov: add KCOV_PC_RANGE to limit pc range

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hi Dmitry,

On Fri, Nov 19, 2021 at 9:07 PM Dmitry Vyukov <dvyukov@xxxxxxxxxx> wrote:
>
> On Fri, 19 Nov 2021 at 13:55, Dmitry Vyukov <dvyukov@xxxxxxxxxx> wrote:
> >
> > +Kaipeng, Hangbin who contributed the coverage filter to syzkaller.
> > This is a discussion about adding a similar filter to the kernel.
> > You can see whole discussion here:
> > https://groups.google.com/g/kasan-dev/c/TQmYUdUC08Y
>
> Joey, what do you think in general about passing a filter bitmap to the kernel?
>
> Since the bitmap is large, it can make sense to reuse it across
> different KCOV instances.
> I am thinking about something along the following lines:
>
> kcov_fd = open("/debugfs/kcov");
> filter_fd = ioctl(kcov_fd, KCOV_CREATE_FILTER, &{... some args
> specifying start/end ...}); filter = mmap(..., filter_fd); ... write
> to the filter ...
>
> ...
> kcov_fd2 = open("/debugfs/kcov");
> ioctl(kcov_fd2, KCOV_ATTACH_FILTER, filter_fd); ioctl(kcov_fd2,
> KCOV_ENABLE);
>
>
> This would allow us to create 2 filters:
> 1. One the interesting subsystems
> 2. Second only for yet uncovered PCs in the interesting subsystems
> (updated as we discover more coverage)
>
> During fuzzing we attach the second filter to KCOV.
> But when we want to obtain full program coverage, we attach the first one.
>
> The filters (bitmaps) are reused across all threads in all executor
> processes (so that we have only 2 filters globally per VM).
>

I think implementing such a filter in kernel would be harmful to syzkaller fuzzing:
1. Both two bitmaps would impede syzkaller from getting backward and forward edge between interesting and uninteresting code.
Currently, syzkaller uses edge but not coverage to decide if the prog should be collected to the corpus. And the second bitmap actually destroys the CFG in the interesting subsystem.
It's impossible that syzkaller restores such information by analyzing the filtered coverage. While syzkaller coverage filter doesn't have this problem.
2. The First bitmap would impede syzkaller from getting full coverage of the whole kernel. So that it would be hard to analyze how the kernel path gets into the interesting subsystem.
It's OK if the syscall description is completed. But, we always need to do such analysis if we try to improve syscall descriptions.
3. Coverage of prog would be imcompleted.

It seems the only reason to introduce in-kernel coverage filter is to defense KCOV area overflow. Do nothing in improving the fuzzing loop.
It is reasonable that a fuzzer should collect full information as feedback, then analyze and decide how to use that information and which to drop.
In the other hand, kernel should try its best to send more information to fuzzer. Only if the memory is not enough to store such information.
Doing such in-kernel filtering would be reasonable.

An alternative choice is doing edge analyzing in kernel also, but KCOV would be more and more restricted and limited.

So, I think the pc_range is enough for defense KCOV area overflow. And keep it from the syzkaller fuzzing loop. But not implement such bitmap into kernel.
Coverage filter in syzkaller would be more flexible. A user could effectively fuzz their objective subsystems and easier to customize fuzzing loop.

BTW, our coverage filter is for Linux/amd64 only. Seems the author needs a coverage filter on arm.


> KCOV_CREATE_FILTER could also accept how many bytes each bit
> represents (that scaling factor, as hardcoding 4, 8, 16 may be bad for
> a stable kernel interface).
>
> But I am still not sure how to support both the main kernel and
> modules. We could allow setting up multiple filters for different PC
> ranges. Or may be just 2 (one for kernel and one for modules range).
> Or maybe 1 bitmap can cover both kernel and modules?
>
> Thoughts?
>
>
> > On Fri, 19 Nov 2021 at 12:21, JianGen Jiao (QUIC)
> > <quic_jiangenj@xxxxxxxxxxx> wrote:
> > >
> > > Yes, on x86_64, module address space is after kernel. But like below on arm64, it's different.
> > >
> > > # grep stext /proc/kallsyms
> > > ffffffc010010000 T _stext
> > > # cat /proc/modules |sort -k 6 | tail -2
> > > Some_module_1 552960 0 - Live 0xffffffc00ca05000 (O)
> > > Some_module_1 360448 0 - Live 0xffffffc00cb8f000 (O) # cat
> > > /proc/modules |sort -k 6 | head -2
> > > Some_module_3 16384 1 - Live 0xffffffc009430000
> > >
> > > -----Original Message-----
> > > From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
> > > Sent: Friday, November 19, 2021 6:38 PM
> > > To: JianGen Jiao (QUIC) <quic_jiangenj@xxxxxxxxxxx>
> > > Cc: andreyknvl@xxxxxxxxx; kasan-dev@xxxxxxxxxxxxxxxx; LKML
> > > <linux-kernel@xxxxxxxxxxxxxxx>; Alexander Lochmann
> > > <info@xxxxxxxxxxxxxxxxxxxxx>; Likai Ding (QUIC)
> > > <quic_likaid@xxxxxxxxxxx>
> > > Subject: Re: [PATCH] kcov: add KCOV_PC_RANGE to limit pc range
> > >
> > > WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.
> > >
> > > On Fri, 19 Nov 2021 at 04:17, JianGen Jiao (QUIC) <quic_jiangenj@xxxxxxxxxxx> wrote:
> > > >
> > > > Hi Dmitry,
> > > > I'm using the start, end pc from cover filter, which currently is the fast way compared to the big bitmap passing from syzkaller solution, as I only set the cover filter to dirs/files I care about.
> > >
> > > I see.
> > > But if we are unlucky and our functions of interest are at the very low and high addresses, start/end will cover almost all kernel code...
> > >
> > > > I checked
> > > > https://groups.google.com/g/kasan-dev/c/oVz3ZSWaK1Q/m/9ASztdzCAA
> > > > AJ, The bitmap seems not the same as syzkaller one, which one
> > > > will be used finally?
> > >
> > > I don't know yet. We need to decide.
> > > In syzkaller we are more flexible and can change code faster, while kernel interfaces are stable and need to be kept forever. So I think we need to concentrate more on the good kernel interface and then support it in syzkaller.
> > >
> > > > ``` Alexander's one
> > > > + pos = (ip - canonicalize_ip((unsigned long)&_stext)) / 4; idx
> > > > + = pos % BITS_PER_LONG; pos /= BITS_PER_LONG; if (likely(pos <
> > > > + t->kcov_size)) WRITE_ONCE(area[pos], READ_ONCE(area[pos]) | 1L
> > > > + t-><<
> > > > + idx);
> > > > ```
> > > > Pc offset is divided by 4 and start is _stext. But for some arch, pc is less than _stext.
> > >
> > > You mean that modules can have PC < _stext?
> > >
> > > > ``` https://github.com/google/syzkaller/blob/master/syz-manager/covfilter.go#L139-L154
> > > > data := make([]byte, 8+((size>>4)/8+1))
> > > > order := binary.ByteOrder(binary.BigEndian)
> > > > if target.LittleEndian {
> > > > order = binary.LittleEndian
> > > > }
> > > > order.PutUint32(data, start)
> > > > order.PutUint32(data[4:], size)
> > > >
> > > > bitmap := data[8:]
> > > > for pc := range pcs {
> > > > // The lowest 4-bit is dropped.
> > > > pc = uint32(backend.NextInstructionPC(target, uint64(pc)))
> > > > pc = (pc - start) >> 4
> > > > bitmap[pc/8] |= (1 << (pc % 8))
> > > > }
> > > > return data
> > > > ```
> > > > Pc offset is divided by 16 and start is cover filter start pc.
> > > >
> > > > I think divided by 8 is more reasonable? Because there is at least one instruction before each __sanitizer_cov_trace_pc call.
> > > > 0000000000000160 R_AARCH64_CALL26 __sanitizer_cov_trace_pc
> > > > 0000000000000168 R_AARCH64_CALL26 __sanitizer_cov_trace_pc
> > > >
> > > > I think we still need my patch because we still need a way to keep the trace_pc call and post-filter in syzkaller doesn't solve trace_pc dropping, right?
> > >
> > > Yes, the in-kernel filter solves the problem of trace capacity/overflows.
> > >
> > >
> > > > But for sure I can use the bitmap from syzkaller.
> > > >
> > > > THX
> > > > Joey
> > > > -----Original Message-----
> > > > From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
> > > > Sent: Thursday, November 18, 2021 10:00 PM
> > > > To: JianGen Jiao (QUIC) <quic_jiangenj@xxxxxxxxxxx>
> > > > Cc: andreyknvl@xxxxxxxxx; kasan-dev@xxxxxxxxxxxxxxxx; LKML
> > > > <linux-kernel@xxxxxxxxxxxxxxx>; Alexander Lochmann
> > > > <info@xxxxxxxxxxxxxxxxxxxxx>
> > > > Subject: Re: [PATCH] kcov: add KCOV_PC_RANGE to limit pc range
> > > >
> > > > WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.
> > > >
> > > > ,On Wed, 17 Nov 2021 at 07:24, Joey Jiao <quic_jiangenj@xxxxxxxxxxx> wrote:
> > > > >
> > > > > Sometimes we only interested in the pcs within some range,
> > > > > while there are cases these pcs are dropped by kernel due to
> > > > > `pos >=
> > > > > t->kcov_size`, and by increasing the map area size doesn't help.
> > > > >
> > > > > To avoid disabling KCOV for these not intereseted pcs during
> > > > > build time, adding this new KCOV_PC_RANGE cmd.
> > > >
> > > > Hi Joey,
> > > >
> > > > How do you use this? I am concerned that a single range of PCs is too restrictive. I can only see how this can work for single module (continuous in memory) or a single function. But for anything else (something in the main kernel, or several modules), it won't work as PCs are not continuous.
> > > >
> > > > Maybe we should use a compressed bitmap of interesting PCs? It allows to support all cases and we already have it in syz-executor, then syz-executor could simply pass the bitmap to the kernel rather than post-filter.
> > > > It's also overlaps with the KCOV_MODE_UNIQUE mode that +Alexander proposed here:
> > > > https://groups.google.com/g/kasan-dev/c/oVz3ZSWaK1Q/m/9ASztdzCAA
> > > > AJ It would be reasonable if kernel uses the same bitmap format
> > > > for these
> > > > 2 features.
> > > >
> > > >
> > > >
> > > > > An example usage is to use together syzkaller's cov filter.
> > > > >
> > > > > Change-Id: I954f6efe1bca604f5ce31f8f2b6f689e34a2981d
> > > > > Signed-off-by: Joey Jiao <quic_jiangenj@xxxxxxxxxxx>
> > > > > ---
> > > > > Documentation/dev-tools/kcov.rst | 10 ++++++++++
> > > > > include/uapi/linux/kcov.h | 7 +++++++
> > > > > kernel/kcov.c | 18 ++++++++++++++++++
> > > > > 3 files changed, 35 insertions(+)
> > > > >
> > > > > diff --git a/Documentation/dev-tools/kcov.rst
> > > > > b/Documentation/dev-tools/kcov.rst
> > > > > index d83c9ab..fbcd422 100644
> > > > > --- a/Documentation/dev-tools/kcov.rst
> > > > > +++ b/Documentation/dev-tools/kcov.rst
> > > > > @@ -52,9 +52,15 @@ program using kcov:
> > > > > #include <fcntl.h>
> > > > > #include <linux/types.h>
> > > > >
> > > > > + struct kcov_pc_range {
> > > > > + uint32 start;
> > > > > + uint32 end;
> > > > > + };
> > > > > +
> > > > > #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long)
> > > > > #define KCOV_ENABLE _IO('c', 100)
> > > > > #define KCOV_DISABLE _IO('c', 101)
> > > > > + #define KCOV_TRACE_RANGE _IOW('c', 103, struct kcov_pc_range)
> > > > > #define COVER_SIZE (64<<10)
> > > > >
> > > > > #define KCOV_TRACE_PC 0
> > > > > @@ -64,6 +70,8 @@ program using kcov:
> > > > > {
> > > > > int fd;
> > > > > unsigned long *cover, n, i;
> > > > > + /* Change start and/or end to your interested pc range. */
> > > > > + struct kcov_pc_range pc_range = {.start = 0, .end =
> > > > > + (uint32)(~((uint32)0))};
> > > > >
> > > > > /* A single fd descriptor allows coverage collection on a single
> > > > > * thread.
> > > > > @@ -79,6 +87,8 @@ program using kcov:
> > > > > PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
> > > > > if ((void*)cover == MAP_FAILED)
> > > > > perror("mmap"), exit(1);
> > > > > + if (ioctl(fd, KCOV_PC_RANGE, pc_range))
> > > > > + dprintf(2, "ignore KCOV_PC_RANGE error.\n");
> > > > > /* Enable coverage collection on the current thread. */
> > > > > if (ioctl(fd, KCOV_ENABLE, KCOV_TRACE_PC))
> > > > > perror("ioctl"), exit(1); diff --git
> > > > > a/include/uapi/linux/kcov.h b/include/uapi/linux/kcov.h index
> > > > > 1d0350e..353ff0a 100644
> > > > > --- a/include/uapi/linux/kcov.h
> > > > > +++ b/include/uapi/linux/kcov.h
> > > > > @@ -16,12 +16,19 @@ struct kcov_remote_arg {
> > > > > __aligned_u64 handles[0];
> > > > > };
> > > > >
> > > > > +#define PC_RANGE_MASK ((__u32)(~((u32) 0))) struct kcov_pc_range {
> > > > > + __u32 start; /* start pc & 0xFFFFFFFF */
> > > > > + __u32 end; /* end pc & 0xFFFFFFFF */
> > > > > +};
> > > > > +
> > > > > #define KCOV_REMOTE_MAX_HANDLES 0x100
> > > > >
> > > > > #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long)
> > > > > #define KCOV_ENABLE _IO('c', 100)
> > > > > #define KCOV_DISABLE _IO('c', 101)
> > > > > #define KCOV_REMOTE_ENABLE _IOW('c', 102, struct kcov_remote_arg)
> > > > > +#define KCOV_PC_RANGE _IOW('c', 103, struct kcov_pc_range)
> > > > >
> > > > > enum {
> > > > > /*
> > > > > diff --git a/kernel/kcov.c b/kernel/kcov.c index
> > > > > 36ca640..59550450
> > > > > 100644
> > > > > --- a/kernel/kcov.c
> > > > > +++ b/kernel/kcov.c
> > > > > @@ -36,6 +36,7 @@
> > > > > * - initial state after open()
> > > > > * - then there must be a single ioctl(KCOV_INIT_TRACE) call
> > > > > * - then, mmap() call (several calls are allowed but not
> > > > > useful)
> > > > > + * - then, optional to set trace pc range
> > > > > * - then, ioctl(KCOV_ENABLE, arg), where arg is
> > > > > * KCOV_TRACE_PC - to trace only the PCs
> > > > > * or
> > > > > @@ -69,6 +70,8 @@ struct kcov {
> > > > > * kcov_remote_stop(), see the comment there.
> > > > > */
> > > > > int sequence;
> > > > > + /* u32 Trace PC range from start to end. */
> > > > > + struct kcov_pc_range pc_range;
> > > > > };
> > > > >
> > > > > struct kcov_remote_area {
> > > > > @@ -192,6 +195,7 @@ static notrace unsigned long
> > > > > canonicalize_ip(unsigned long ip) void notrace
> > > > > __sanitizer_cov_trace_pc(void) {
> > > > > struct task_struct *t;
> > > > > + struct kcov_pc_range pc_range;
> > > > > unsigned long *area;
> > > > > unsigned long ip = canonicalize_ip(_RET_IP_);
> > > > > unsigned long pos;
> > > > > @@ -199,6 +203,11 @@ void notrace __sanitizer_cov_trace_pc(void)
> > > > > t = current;
> > > > > if (!check_kcov_mode(KCOV_MODE_TRACE_PC, t))
> > > > > return;
> > > > > + pc_range = t->kcov->pc_range;
> > > > > + if (pc_range.start < pc_range.end &&
> > > > > + ((ip & PC_RANGE_MASK) < pc_range.start ||
> > > > > + (ip & PC_RANGE_MASK) > pc_range.end))
> > > > > + return;
> > > > >
> > > > > area = t->kcov_area;
> > > > > /* The first 64-bit word is the number of subsequent
> > > > > PCs. */ @@ -568,6 +577,7 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
> > > > > int mode, i;
> > > > > struct kcov_remote_arg *remote_arg;
> > > > > struct kcov_remote *remote;
> > > > > + struct kcov_pc_range *pc_range;
> > > > > unsigned long flags;
> > > > >
> > > > > switch (cmd) {
> > > > > @@ -589,6 +599,14 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
> > > > > kcov->size = size;
> > > > > kcov->mode = KCOV_MODE_INIT;
> > > > > return 0;
> > > > > + case KCOV_PC_RANGE:
> > > > > + /* Limit trace pc range. */
> > > > > + pc_range = (struct kcov_pc_range *)arg;
> > > > > + if (copy_from_user(&kcov->pc_range, pc_range, sizeof(kcov->pc_range)))
> > > > > + return -EINVAL;
> > > > > + if (kcov->pc_range.start >= kcov->pc_range.end)
> > > > > + return -EINVAL;
> > > > > + return 0;
> > > > > case KCOV_ENABLE:
> > > > > /*
> > > > > * Enable coverage for the current task.
> > > > > --
> > > > > 2.7.4