Re: [PATCH v4 0/3] phy: freescale: Add i.MX8qm Mixel LVDS PHY support

[Vinod Koul]

On 06-07-22, 11:48, Liu Ying wrote:
> Hi,
> 
> This series aims to add Freescale i.MX8qm LVDS PHY driver and dt-binding
> support.
> 
> The PHY IP is from Mixel, Inc.
> The PHY IP supports two LVDS PHYs, thus two LVDS channels.
> 
> Each LVDS PHY may work by itself to support a LVDS display device.
> 
> When two LVDS PHYs are enabled simultaneously, PHY configurations and reference
> clock rate have to be the same since there is only one set of PHY registers.
> In this case, the two LVDS PHYs are usually used to support a dual LVDS link
> display device, one as master PHY and the other as slave PHY.

Applied, thanks

-- 
~Vinod