Re: [PATCH v8 1/1] serial: core: Start managing serial controllers to enable runtime PM
From: Andy Shevchenko
Date: Wed Mar 22 2023 - 10:49:46 EST
On Wed, Mar 22, 2023 at 01:12:51PM +0200, Tony Lindgren wrote:
> We want to enable runtime PM for serial port device drivers in a generic
> way. To do this, we want to have the serial core layer manage the
> registered physical serial controller devices.
>
> To do this, let's set up a struct bus and struct device for the serial
> core controller as suggested by Greg and Jiri. The serial core controller
> devices are children of the physical serial port device. The serial core
> controller device is needed to support multiple different kind of ports
> connected to single physical serial port device.
>
> Let's also set up a struct device for the serial core port. The serial
> core port instances are children of the serial core controller device.
>
> With the serial core port device we can now flush pending TX on the
> runtime PM resume as suggested by Johan.
With below addressed, FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
...
> + device_initialize(&sbd->dev);
> + sbd->dev.parent = parent_dev;
> + sbd->dev.bus = &serial_base_bus_type;
> + sbd->dev.release = &serial_base_release;
> +
> + if (str_has_prefix(name, "ctrl")) {
> + id = port->ctrl_id;
> + } else {
> + id = port->line;
> + sbd->port = port;
> + }
> +
> + err = dev_set_name(&sbd->dev, "%s.%s.%d", name, dev_name(port->dev), id);
> + if (err)
> + goto err_free_dev;
> +
> + err = device_add(&sbd->dev);
> + if (err)
> + goto err_put_device;
> +
> + return &sbd->dev;
> +
> +err_put_device:
> + put_device(&sbd->dev);
> + kfree_const(sbd->dev.kobj.name);
This is double free if not const, right?
At least that's how I read kobject_cleanup() implementation.
Sorry I haven't paid attention to this earlier.
...
> +/*
> + * Serial core port device driver
> + */
Put it on one line for now?
--
With Best Regards,
Andy Shevchenko