The TPS6598x PD controller provides an active-high hardware reset input
that reinitializes all device settings. If it is not grounded by
design, the driver must be able to de-assert it in order to initialize
the device.
The PD controller is not ready for registration right after the reset
de-assertion and a delay must be introduced in that case. According to
TI, the delay can reach up to 1000 ms [1], which is in line with the
experimental results obtained with a TPS65987D.
Add a GPIO descriptor for the reset signal and basic reset management
for initialization and suspend/resume.
[1] https://e2e.ti.com/support/power-management-group/power-management/
f/power-management-forum/1269856/tps65987d-tps65987d-reset-de-assert-
to-normal-operation/4809389#4809389
Signed-off-by: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>