[PATCH v2 1/1] arm64: dts: qcom: ipq6018: Add QUP5 SPI node

[Chukun Pan]

Add node to support the QUP5 SPI controller inside of IPQ6018.
Some routers use this bus to connect SPI TPM chips.

Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx>
---
Changes in v2:
* No changes, resend due to error link to other threads.

 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index ec0a0ce1849e..2399d16f147e 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -527,6 +527,20 @@ blsp1_spi2: spi@78b6000 {
 			status = "disabled";
 		};
 
+		blsp1_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b9000 0x0 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
-- 
2.25.1