Re: [PATCH v3 2/2] clocksource/drivers/timer-clint: Add T-Head C9xx clint

[Emil Renner Berthing]

Conor Dooley wrote:
> On Wed, Apr 10, 2024 at 10:23:47PM +0800, Jisheng Zhang wrote:
> > To use the T-HEAD C9xx clint in RISCV-M NOMMU env, we need to take
> > care two points:
> >
> > 1.The mtimecmp in T-Head C9xx clint only supports 32bit read/write,
> > implement such support.
> >
> > 2. As pointed out by commit ca7810aecdba ("lib: utils/timer: mtimer:
> > add a quirk for lacking mtime register") of opensbi:
> >
> > "T-Head developers surely have a different understanding of time CSR and
> > CLINT's mtime register with SiFive ones, that they did not implement
> > the mtime register at all -- as shown in openC906 source code, their
> > time CSR value is just exposed at the top of their processor IP block
> > and expects an external continous counter, which makes it not
> > overrideable, and thus mtime register is not implemented, even not for
> > reading. However, if CLINTEE is not enabled in T-Head's MXSTATUS
> > extended CSR, these systems still rely on the mtimecmp registers to
> > generate timer interrupts. This makes it necessary to implement T-Head
> > C9xx CLINT support in OpenSBI MTIMER driver, which skips implementing
> > reading mtime register and falls back to default code that reads time
> > CSR."
> >
> > So, we need to fall back to read time CSR instead of mtime register.
> > Add riscv_csr_time_available static key for this purpose.
> >
> > Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxx>
> > ---
> >  arch/riscv/include/asm/clint.h    |  2 ++
> >  arch/riscv/include/asm/timex.h    | 18 +++++++++---
> >  drivers/clocksource/timer-clint.c | 48 +++++++++++++++++++++++++++----
> >  3 files changed, 59 insertions(+), 9 deletions(-)
> >
> > diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h
> > index 0789fd37b40a..c6057a182c5d 100644
> > --- a/arch/riscv/include/asm/clint.h
> > +++ b/arch/riscv/include/asm/clint.h
> > @@ -10,6 +10,7 @@
> >  #include <asm/mmio.h>
> >
> >  #ifdef CONFIG_RISCV_M_MODE
> > +#include <linux/jump_label.h>
> >  /*
> >   * This lives in the CLINT driver, but is accessed directly by timex.h to avoid
> >   * any overhead when accessing the MMIO timer.
> > @@ -21,6 +22,7 @@
> >   * like "riscv_mtime", to signify that these non-ISA assumptions must hold.
> >   */
> >  extern u64 __iomem *clint_time_val;
> > +DECLARE_STATIC_KEY_FALSE(riscv_csr_time_available);
> >  #endif
> >
> >  #endif
> > diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
> > index a06697846e69..007a15482d75 100644
> > --- a/arch/riscv/include/asm/timex.h
> > +++ b/arch/riscv/include/asm/timex.h
> > @@ -17,18 +17,27 @@ typedef unsigned long cycles_t;
> >  #ifdef CONFIG_64BIT
> >  static inline cycles_t get_cycles(void)
> >  {
> > -	return readq_relaxed(clint_time_val);
> > +	if (static_branch_likely(&riscv_csr_time_available))
> > +		return csr_read(CSR_TIME);
> > +	else
> > +		return readq_relaxed(clint_time_val);
> >  }
> >  #else /* !CONFIG_64BIT */
> >  static inline u32 get_cycles(void)
> >  {
> > -	return readl_relaxed(((u32 *)clint_time_val));
> > +	if (static_branch_likely(&riscv_csr_time_available))
> > +		return csr_read(CSR_TIME);
> > +	else
> > +		return readl_relaxed(((u32 *)clint_time_val));
> >  }
> >  #define get_cycles get_cycles
> >
> >  static inline u32 get_cycles_hi(void)
> >  {
> > -	return readl_relaxed(((u32 *)clint_time_val) + 1);
> > +	if (static_branch_likely(&riscv_csr_time_available))
> > +		return csr_read(CSR_TIMEH);
> > +	else
> > +		return readl_relaxed(((u32 *)clint_time_val) + 1);
> >  }
>
> None of the else branches here need to actually be an else, since the
> other branch returns. Otherwise, looks aight to me, thanks for the
> update.

Also the static key is initialized to false and the commit message says only
the C9xx cores need to use the CSR_TIME, so shouldn't it be

  if (static_branch_unlikely(&riscv_csr_time_available))

instead, or am I reading this wrong?

/Emil