[PATCH] arm64: dts: st: add power domain on stm32mp25

[Patrick Delaunay]

Add power domains on STM32MP25x SoC for supported low power modes:
- CPU_PD0/1: domain for idle of each core Cortex A35 (CStop)
- CLUSTER_PD: D1 domain with Stop1 and LP-Stop1 modes support when
  the Cortex A35 cluster and each device assigned to CPU1=CA35
  are deactivated
- RET_PD: D1 domain retention (VDDCore is reduced) to support
          the LPLV-Stop1 mode

Signed-off-by: Patrick Delaunay <patrick.delaunay@xxxxxxxxxxx>
---

 arch/arm64/boot/dts/st/stm32mp251.dtsi | 16 ++++++++++++++++
 arch/arm64/boot/dts/st/stm32mp253.dtsi |  9 +++++++++
 2 files changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index af1444bf9442..4beb0a0bef4f 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -18,6 +18,8 @@ cpu0: cpu@0 {
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
 		};
 	};
 
@@ -104,6 +106,20 @@ intc: interrupt-controller@4ac00000 {
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			power-domains = <&RET_PD>;
+		};
+
+		RET_PD: power-domain-retention {
+			#power-domain-cells = <0>;
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi
index af48e82efe8a..79c02ef2e51e 100644
--- a/arch/arm64/boot/dts/st/stm32mp253.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi
@@ -12,6 +12,8 @@ cpu1: cpu@1 {
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
 		};
 	};
 
@@ -20,4 +22,11 @@ arm-pmu {
 			     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
+
+	psci {
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+		};
+	};
 };
-- 
2.25.1