[PATCH 08/15] i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout()

[Wolfram Sang]

There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:

	timeout = wait_for_completion_timeout(...)
	if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-stm32f4.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index 859ac0cf7f6c..f8b12be6ef55 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -681,7 +681,7 @@ static int stm32f4_i2c_xfer_msg(struct stm32f4_i2c_dev *i2c_dev,
 {
 	struct stm32f4_i2c_msg *f4_msg = &i2c_dev->msg;
 	void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1;
-	unsigned long timeout;
+	unsigned long time_left;
 	u32 mask;
 	int ret;
 
@@ -706,11 +706,11 @@ static int stm32f4_i2c_xfer_msg(struct stm32f4_i2c_dev *i2c_dev,
 		stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
 	}
 
-	timeout = wait_for_completion_timeout(&i2c_dev->complete,
-					      i2c_dev->adap.timeout);
+	time_left = wait_for_completion_timeout(&i2c_dev->complete,
+						i2c_dev->adap.timeout);
 	ret = f4_msg->result;
 
-	if (!timeout)
+	if (!time_left)
 		ret = -ETIMEDOUT;
 
 	return ret;
-- 
2.43.0