[PATCH v3 0/3] arm64: dts: add i.MX95 and EVK board

[Peng Fan (OSS)]

Add a minimal i.MX95 dtsi and EVK board dts.
i.MX95 has a M33 running SCMI firmware, but as of now, the scmi pinctrl
driver still not ready for i.MX95, so we count on bootloader to
configure the pinctrl for lpuart and sdhc and it boots well. After pinctrl
driver ready, we could move to use scmi pinctrl.

Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
Changes in v3:
- Drop irqsteer node because binding not accepted
- Pass dtbs_check
- Link to v2: https://lore.kernel.org/r/20240226-imx95-dts-v2-0-00e36637b07e@xxxxxxx

Changes in v2:
- Addressed Rob and Krzysztof's comments, and fix dts_check issue
  To pass the dtbs_check, need apply:
  https://lore.kernel.org/all/20240226070910.3379108-1-peng.fan@xxxxxxxxxxx/
  https://lore.kernel.org/all/20240226130243.3820915-1-peng.fan@xxxxxxxxxxx/
  https://lore.kernel.org/all/20240226130516.3821803-1-peng.fan@xxxxxxxxxxx/
  https://lore.kernel.org/all/20240226130826.3824251-1-peng.fan@xxxxxxxxxxx/
  https://lore.kernel.org/all/20240219-imx-mailbox-v8-1-75535a87794e@xxxxxxx/

- Link to v1: https://lore.kernel.org/r/20240218-imx95-dts-v1-0-2959f89f2018@xxxxxxx

---
Peng Fan (3):
      dt-bindings: arm: fsl: add i.MX95 19x19 EVK board
      arm64: dts: freescale: add i.MX95 basic dtsi
      arm64: dts: freescale: add i.MX95 19x19 EVK minimal board dts

 Documentation/devicetree/bindings/arm/fsl.yaml    |    6 +
 arch/arm64/boot/dts/freescale/Makefile            |    1 +
 arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts |  111 ++
 arch/arm64/boot/dts/freescale/imx95-clock.h       |  187 ++++
 arch/arm64/boot/dts/freescale/imx95-power.h       |   55 +
 arch/arm64/boot/dts/freescale/imx95.dtsi          | 1152 +++++++++++++++++++++
 6 files changed, 1512 insertions(+)
---
base-commit: bb7a2467e6beef44a80a17d45ebf2931e7631083
change-id: 20240428-imx95-dts-v3-bee59f0e559b

Best regards,
-- 
Peng Fan <peng.fan@xxxxxxx>