Re: [PATCH v3 0/2] hwmon: (pmbus) Add support for Infineon XDP710

[Peter Yin]

Sorry, I thought it was going to be applied after I fixed it.

On Mon, Apr 29, 2024 at 1:00 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> On 4/28/24 20:38, Peter Yin wrote:
> > Add support for Infineon XDP710. This is a Hot-Swap Controller.
> >
> > Change log:
> >
> > v2 -> v3
> >      - Fixed Ack quotes
> >      - rename "microOhmRsense" to "micro_ohm_rsense"
> >
> > v1 -> v2
> >      - Merged patch 3 into patch 1.
> >      - Modified comments.
> >      - Fixed the microOhmRsense array.
> >      - Improved operational accuracy.
> >
> > v1
> >      - Add support for xdp710 hot-swap device from Infineon vendor
> > ---
> >
> > Peter Yin (2):
> >    hwmon: (pmbus) Add support for Infineon XDP710
> >    dt-bindings: hwmon: Add infineon xdp710 driver bindings
> >
> >   .../devicetree/bindings/trivial-devices.yaml  |   2 +
> >   Documentation/hwmon/index.rst                 |   1 +
> >   Documentation/hwmon/xdp710.rst                |  83 +++++++++++
> >   drivers/hwmon/pmbus/Kconfig                   |   9 ++
> >   drivers/hwmon/pmbus/Makefile                  |   1 +
> >   drivers/hwmon/pmbus/xdp710.c                  | 132 ++++++++++++++++++
> >   6 files changed, 228 insertions(+)
> >   create mode 100644 Documentation/hwmon/xdp710.rst
> >   create mode 100644 drivers/hwmon/pmbus/xdp710.c
> >
>
> What is the point of resending this ? I said I applied the series.
>
> Guenter
>