[PATCH] nvme-fabrics: use reserved tag for reg read/write command

[brookxu.cn]

From: Chunguang Xu <chunguang.xu@xxxxxxxxxx>

In some scenarios, if too many commands are issued by nvme command in
the same time by user tasks, this may exhaust all tags of admin_q. If
a reset (nvme reset or IO timeout) occurs before these commands finish,
reconnect routine may fail to update nvme regs due to insufficient tags,
which will cause kernel hang forever. In order to workaround this issue,
maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved
tags. This maybe safe for nvmf:

1. For the disable ctrl path,  we will not issue connect command
2. For the enable ctrl / fw activate path, since connect and reg_xx()
   are called serially.

So the reserved tags may still be enough while reg_xx() use reserved tags.

Signed-off-by: Chunguang Xu <chunguang.xu@xxxxxxxxxx>
---
 drivers/nvme/host/fabrics.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c
index 1f0ea1f32d22..f6416f8553f0 100644
--- a/drivers/nvme/host/fabrics.c
+++ b/drivers/nvme/host/fabrics.c
@@ -180,7 +180,7 @@ int nvmf_reg_read32(struct nvme_ctrl *ctrl, u32 off, u32 *val)
 	cmd.prop_get.offset = cpu_to_le32(off);
 
 	ret = __nvme_submit_sync_cmd(ctrl->fabrics_q, &cmd, &res, NULL, 0,
-			NVME_QID_ANY, 0);
+			NVME_QID_ANY, NVME_SUBMIT_RESERVED);
 
 	if (ret >= 0)
 		*val = le64_to_cpu(res.u64);
@@ -226,7 +226,7 @@ int nvmf_reg_read64(struct nvme_ctrl *ctrl, u32 off, u64 *val)
 	cmd.prop_get.offset = cpu_to_le32(off);
 
 	ret = __nvme_submit_sync_cmd(ctrl->fabrics_q, &cmd, &res, NULL, 0,
-			NVME_QID_ANY, 0);
+			NVME_QID_ANY, NVME_SUBMIT_RESERVED);
 
 	if (ret >= 0)
 		*val = le64_to_cpu(res.u64);
@@ -271,7 +271,7 @@ int nvmf_reg_write32(struct nvme_ctrl *ctrl, u32 off, u32 val)
 	cmd.prop_set.value = cpu_to_le64(val);
 
 	ret = __nvme_submit_sync_cmd(ctrl->fabrics_q, &cmd, NULL, NULL, 0,
-			NVME_QID_ANY, 0);
+			NVME_QID_ANY, NVME_SUBMIT_RESERVED);
 	if (unlikely(ret))
 		dev_err(ctrl->device,
 			"Property Set error: %d, offset %#x\n",
-- 
2.25.1