[PATCH v4 04/10] PCI: qcom-ep: Drop 'Link is enabled' from the debug message for BME event

[Manivannan Sadhasivam]

Bus Master Enable (BME) event that is generated by the Qcom PCIe EP
controller due to host setting the Bus Master Enable bit in the Command
register doesn't have anything to do with the PCIe link.

Hence, drop the bogus statement.

Suggested-by: Bjorn Helgaas <helgaas@xxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom-ep.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index f6e925d434f6..dcac177b55fb 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -636,7 +636,7 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
 		pcie_ep->link_status = QCOM_PCIE_EP_LINK_DOWN;
 		pci_epc_linkdown(pci->ep.epc);
 	} else if (FIELD_GET(PARF_INT_ALL_BME, status)) {
-		dev_dbg(dev, "Received Bus Master Enable event. Link is enabled!\n");
+		dev_dbg(dev, "Received Bus Master Enable event\n");
 		pcie_ep->link_status = QCOM_PCIE_EP_LINK_ENABLED;
 		qcom_pcie_ep_icc_update(pcie_ep);
 		pci_epc_bus_master_enable_notify(pci->ep.epc);

-- 
2.25.1