[RESEND PATCH 1/3] slimbus: qcom-ngd-ctrl: Reduce auto suspend delay

[srinivas . kandagatla]

From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>

Currently we have auto suspend delay of 1s which is
very high and it takes long time to driver for runtime
suspend after use case is done.

Hence to optimize runtime PM ops, reduce auto suspend
delay to 100ms.

Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
Acked-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 drivers/slimbus/qcom-ngd-ctrl.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index a09a26bf4988..ce28ac35b2b6 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -81,7 +81,6 @@
 #define SLIM_USR_MC_DISCONNECT_PORT	0x2E
 #define SLIM_USR_MC_REPEAT_CHANGE_VALUE	0x0
 
-#define QCOM_SLIM_NGD_AUTOSUSPEND	MSEC_PER_SEC
 #define SLIM_RX_MSGQ_TIMEOUT_VAL	0x10000
 
 #define SLIM_LA_MGR	0xFF
@@ -1575,7 +1574,7 @@ static int qcom_slim_ngd_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ctrl);
 	pm_runtime_use_autosuspend(dev);
-	pm_runtime_set_autosuspend_delay(dev, QCOM_SLIM_NGD_AUTOSUSPEND);
+	pm_runtime_set_autosuspend_delay(dev, 100);
 	pm_runtime_set_suspended(dev);
 	pm_runtime_enable(dev);
 	pm_runtime_get_noresume(dev);
-- 
2.25.1