Re: [PATCH v4 1/3] ALSA: hda/tas2781: Add tas2781 hda driver based on SPI

[Takashi Iwai]

On Tue, 30 Apr 2024 09:25:42 +0200,
Baojun Xu wrote:
> 
> Integrate tas2781 hda spi driver configs for HP (Varcolac).
> Every tas2781 SPI node was added by serial-multi-instantie.c as a SPI device.
> The code support Realtek as the primary codec.
> 
> Signed-off-by: Baojun Xu <baojun.xu@xxxxxx>
> 
> ---
> v4:
>  - Add old hardware id "TIAS2781" for compatible with old production
>  - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs
> v3:
>  - Move HID up to above /* Non-conforming _HID ... */ in scan.c,
>    for avoid misunderstanding.
>  - Move HID up to above /* Non-conforming _HID ... */ in
>    serial-multi-instantiate.c, for avoid misunderstanding.
>  - Change objs to y for snd-hda-scodec-tas2781-spi- in Makefile.
> ---
>  drivers/acpi/scan.c                             |  2 ++
>  drivers/platform/x86/serial-multi-instantiate.c | 13 +++++++++++++
>  sound/pci/hda/Kconfig                           | 14 ++++++++++++++
>  sound/pci/hda/Makefile                          |  2 ++
>  sound/pci/hda/patch_realtek.c                   | 13 +++++++++++++
>  5 files changed, 44 insertions(+)
> 
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index d1464324de95..51af181ccf62 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1765,6 +1765,8 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
>  		{"CSC3557", },
>  		{"INT33FE", },
>  		{"INT3515", },
> +		{"TXNW2781", },
> +		{"TIAS2781", },
>  		/* Non-conforming _HID for Cirrus Logic already released */
>  		{"CLSA0100", },
>  		{"CLSA0101", },
> diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
> index 97b9c6392230..d1c766f17b26 100644
> --- a/drivers/platform/x86/serial-multi-instantiate.c
> +++ b/drivers/platform/x86/serial-multi-instantiate.c
> @@ -368,6 +368,17 @@ static const struct smi_node cs35l57_hda = {
>  	.bus_type = SMI_AUTO_DETECT,
>  };
>  
> +static const struct smi_node tas2781_hda = {
> +	.instances = {
> +		{ "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
> +		{ "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
> +		{ "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
> +		{ "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
> +		{}
> +	},
> +	.bus_type = SMI_AUTO_DETECT,
> +};
> +
>  /*
>   * Note new device-ids must also be added to ignore_serial_bus_ids in
>   * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
> @@ -380,6 +391,8 @@ static const struct acpi_device_id smi_acpi_ids[] = {
>  	{ "CSC3556", (unsigned long)&cs35l56_hda },
>  	{ "CSC3557", (unsigned long)&cs35l57_hda },
>  	{ "INT3515", (unsigned long)&int3515_data },
> +	{ "TXNW2781", (unsigned long)&tas2781_hda },
> +	{ "TIAS2781", (unsigned long)&tas2781_hda },
>  	/* Non-conforming _HID for Cirrus Logic already released */
>  	{ "CLSA0100", (unsigned long)&cs35l41_hda },
>  	{ "CLSA0101", (unsigned long)&cs35l41_hda },
> diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
> index f806636242ee..15f0e66b77e5 100644
> --- a/sound/pci/hda/Kconfig
> +++ b/sound/pci/hda/Kconfig
> @@ -202,6 +202,20 @@ config SND_HDA_SCODEC_TAS2781_I2C
>  comment "Set to Y if you want auto-loading the side codec driver"
>  	depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_I2C=m
>  
> +config SND_HDA_SCODEC_TAS2781_SPI
> +	tristate "Build TAS2781 HD-audio side codec support for SPI Bus"
> +	depends on SPI_MASTER
> +	depends on ACPI
> +	depends on EFI
> +	depends on SND_SOC
> +	select CRC32_SARWATE
> +	help
> +	  Say Y or M here to include TAS2781 SPI HD-audio side codec support
> +	  in snd-hda-intel driver, such as ALC287.
> +
> +comment "Set to Y if you want auto-loading the side codec driver"
> +	depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_SPI=m
> +
>  config SND_HDA_CODEC_REALTEK
>  	tristate "Build Realtek HD-audio codec support"
>  	select SND_HDA_GENERIC
> diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
> index 13e04e1f65de..2d5d4d841d87 100644
> --- a/sound/pci/hda/Makefile
> +++ b/sound/pci/hda/Makefile
> @@ -39,6 +39,7 @@ snd-hda-scodec-cs35l56-spi-objs :=	cs35l56_hda_spi.o
>  snd-hda-cs-dsp-ctls-objs :=		hda_cs_dsp_ctl.o
>  snd-hda-scodec-component-objs :=	hda_component.o
>  snd-hda-scodec-tas2781-i2c-objs :=	tas2781_hda_i2c.o
> +snd-hda-scodec-tas2781-spi-y :=	tas2781_hda_spi.o tas2781_spi_fwlib.o

A nitpicking: better to align with other lines (i.e. with *-objs
instead of *-y).

The main problem here is, though, that this commit will break the
build, because you introduced a Kconfig that can be enabled, while the
corresponding code for snd-hda-scodec-tas2781-spi isn't present yet.
This is bad for the git-bisection.

You'd need to reorganize better how the code is added piece-by-piece.


thanks,

Takashi