Re: Backup to Exabyte aborts (1.3.??)

temp (temp@cygnus.spyder.org)
Tue, 9 Apr 1996 09:32:01 -0400 (EDT)


> backup more than 450 Mb from IDE drives but now cannot backup 300Mb
> from a scsi disk.

your lucky :) I can't even backup one file with exabyte or archive
unless on the same hd I reboot to freebsd, and mount linux , then I can
backup 18gigs no problem
about the same errors to tho. aborting command due to timeout, I've had
that problem since 1.3.15 when I think it did work. I usually end up
losing a ton of files too, cause I have to do a hard reboot.
>
> Here is the console log from last night's effort:
>
>
> Apr 8 23:20:40 mustang kernel: scsi : aborting command due to timeout : pid 26527, scsi0, channel 0, id 1, lun 0 0x08 09 0b fd 0e 00
> Apr 8 23:20:48 mustang kernel: scsi : aborting command due to timeout : pid 26527, scsi0, channel 0, id 1, lun 0 0x08 09 0b fd 0e 00
> Apr 8 23:20:48 mustang kernel: SCSI host 0 abort (pid 26527) timed out - resetting
> Apr 8 23:20:48 mustang kernel: SCSI bus is being reset for host 0.
> Apr 8 23:20:49 mustang kernel: Sent BUS DEVICE RESET to target 1
> Apr 8 23:20:49 mustang kernel: Sending DID_RESET for target 1
> Apr 8 23:20:49 mustang kernel: aha1542_out failed(2): Sending DID_RESET for target 1
> Apr 8 23:20:49 mustang last message repeated 4 times
> Apr 8 23:20:49 mustang kernel: aha1542_out failed(2): Ok.
> Apr 8 23:20:49 mustang kernel: Linux version 1.3.84 (root@mustang) (gcc version 2.7.2) #1 Mon Apr 8 19:37:16 CST 1996
> Apr 8 23:20:49 mustang kernel: Serial driver version 4.11 with no serial options enabled
> Apr 8 23:20:49 mustang kernel: tty00 at 0x03f8 (irq = 4) is a 16450
> Apr 8 23:20:49 mustang kernel: tty01 at 0x02f8 (irq = 3) is a 16550A
> Apr 8 23:20:50 mustang kernel: hda: Maxtor 7245 AT, 234MB w/64kB Cache, CHS=967/16/31
> Apr 8 23:20:50 mustang kernel: hdb: WDC AC2340H, 325MB w/128kB Cache, CHS=1010/12/55
> Apr 8 23:20:50 mustang kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Apr 8 23:20:50 mustang kernel: Floppy drive(s): fd0 is 1.44M
> Apr 8 23:20:50 mustang kernel: Started kswapd v 1.4.2.2
> Apr 8 23:20:50 mustang kernel: FDC 0 is a 8272A
> Apr 8 23:20:50 mustang kernel: Configuring Adaptec (SCSI-ID 7) at IO:330, IRQ 11, DMA priority 5
> Apr 8 23:20:50 mustang kernel: scsi0 : Adaptec 1542
> Apr 8 23:20:50 mustang kernel: scsi : 1 host.
> Apr 8 23:20:50 mustang kernel: Vendor: IBM Model: DPES-31080 Rev: S31Q
> Apr 8 23:20:50 mustang kernel: Type: Direct-Access ANSI SCSI revision: 02
> Apr 8 23:20:50 mustang kernel: Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
> Apr 8 23:20:50 mustang kernel: Vendor: EXABYTE Model: EXB-8200 Rev: 2618
> Apr 8 23:20:51 mustang kernel: Type: Sequential-Access ANSI SCSI revision: 01
> Apr 8 23:20:51 mustang kernel: scsi : detected 1 SCSI disk total.
> Apr 8 23:20:51 mustang kernel: SCSI Hardware sector size is 512 bytes on device sda
> Apr 8 23:20:51 mustang kernel: wd.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
> Apr 8 23:20:51 mustang kernel: eth0: WD80x3 at 0x300, 00 00 C0 47 39 5C WD8013, IRQ 10, shared memory at 0xd8000-0xdbfff.
> Apr 8 23:20:51 mustang kernel: Partition check:
> Apr 8 23:20:51 mustang kernel: sda: sda1
> Apr 8 23:20:51 mustang kernel: hda: hda1 hda2 hda3
> Apr 8 23:20:51 mustang kernel: hdb: hdb1
> Apr 8 23:20:51 mustang kernel: VFS: Mounted root (ext2 filesystem) readonly.
> Apr 8 23:20:51 mustang kernel: Adding Swap: 12396k swap-space
> Apr 8 23:21:14 mustang kernel: scsi : aborting command due to timeout : pid 26527, scsi0, channel 0, id 1, lun 0 0x08 09 0b fd 0e 00
> Apr 8 23:21:14 mustang kernel: SCSI host 0 abort (pid 26527) timed out - resetting
> Apr 8 23:21:14 mustang kernel: SCSI bus is being reset for host 0.
> Apr 8 23:21:14 mustang kernel: HACC aha1542.c: interrupt received, but no mail.
> Apr 8 23:21:15 mustang kernel: Sent BUS RESET to scsi host 0
> Apr 8 23:21:15 mustang kernel: Sending DID_RESET for target 1
> Apr 8 23:21:15 mustang last message repeated 7 times
> Apr 8 23:21:15 mustang kernel: aha1542_intr_handle: Unexpected interrupt
> Apr 8 23:21:15 mustang kernel: tarstat=0, hastat=0 idlun=28 ccb#=3
> Apr 8 23:21:15 mustang kernel: aha1542_intr_handle: Unexpected interrupt
> Apr 8 23:21:15 mustang kernel: tarstat=0, hastat=0 idlun=28 ccb#=4
> Apr 8 23:21:23 mustang kernel: scsi : aborting command due to timeout : pid 26527, scsi0, channel 0, id 1, lun 0 0x08 09 0b fd 0e 00
> ========================================================================
> Stephen Davies Consulting scldad@sdc.com.au
> Adelaide, South Australia. Voice: 61-8-2728863
> Computing & Network solutions. Fax : 61-8-2741015
>
>
>