Eric Hoeltzel
On Thu, 13 Jun 1996, Alberto Menegazzi wrote:
> I have 1.99.10 (pre 2.0.10) kernel.
> At boot I get these errors. I have a 486 DX4/100 with ALI EIDE controller
> on-board and I've compiled the support for this controller on my kernel.
> These are the interesting messages at boot.
>
> ide_setup: hda=autotune
> ide_setup: ide0=autotune
> ide_setup: ide0=ali14xxali14xx: base= 0x0f4, regOn = 0x30
>
> hda: PIO mode3, t1=180ns, t2=80ns, cycles = 3+3, 3+3
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>
>
> Both with the ALI support activated or not, at boot, I get seldom fsck error
> (even if i correctly shutdown my Linux box) and ALWAYS this error at boot :
>
>
> hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hda: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=894061, sector=71533
> hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hda: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=894061, sector=71533
> hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hda: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=894061, sector=71533
> hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hda: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=894061, sector=71533
> ide0: reset: success
> hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hda: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=894061, sector=71533
> hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hda: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=894061, sector=71533
> hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hda: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=894061, sector=71533
> hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hda: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=894061, sector=71533
> ide0: reset: success
> hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hda: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=894061, sector=71533
> end_request: I/O error, dev 03:02, sector 71533
>
>
> What has happened ? Is something badly configured or is my hard disk
> somewhere broken (maybe at sector 71533)? What can I do? Should I back up
> and update a Bad-Track-Table with BIOS features or fdisk ?
>
> PLEASE HELP !!!!!
>
> TIA
> ,,,
> (0^0)
> ________________________oOO__( )__OOo__
>
> Linux, the choice of the GNU generation
> _______________________________________
>
>
>