I'm using Linux 2.0.* and I've started hacing strange problems since (I think)
I added a Buglogic KT 958 SCSI card. Basically the computer boots to this point..
ide: 430FX (Triton) on PCI bus 0 function 57
Jul 12 09:25:17 hudsonpc kernel: ide0: BM-DMA at 0x1000-0x1007
Jul 12 09:25:17 hudsonpc kernel: ide0 timing: (0xa107) sample_CLKs=3, recovery_CLKs=3
Jul 12 09:25:17 hudsonpc kernel: master: fastDMA=on PreFetch=on IORDY=on fastPIO=on
Jul 12 09:25:17 hudsonpc kernel: slave : fastDMA=off PreFetch=off IORDY=off fastPIO=off
Jul 12 09:25:17 hudsonpc kernel: ide1: BM-DMA at 0x1008-0x100f
Jul 12 09:25:17 hudsonpc kernel: ide1 timing: (0xa377) sample_CLKs=3, recovery_CLKs=1
Jul 12 09:25:17 hudsonpc kernel: master: fastDMA=on PreFetch=on IORDY=on fastPIO=on
Jul 12 09:25:17 hudsonpc kernel: slave : fastDMA=on PreFetch=on IORDY=on fastPIO=on
Jul 12 09:25:17 hudsonpc kernel: hda: DPEA-31080, 1033MB w/448kB Cache, LBA, Jul 12 09:25:17 hudsonpc kernel: hdc: WDC AC31600H, 1549MB w/128kB Cache, LBA, CHS=3148/16/63, DMA
Jul 12 09:25:17 hudsonpc kernel: hdd: WDC AC31600H, 1549MB w/128kB Cache, LBA, CHS=3148/16/63, DMA
Jul 12 09:25:17 hudsonpc kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
and then hangs... It should continue with
ide1 at 0x170-0x177,0x376 on irq 15
which is what my 1.3 kernels do.
Does anyone knoe wht might be happening here ?
Thanks
Liam