if i issue
% cat /proc/scsi/ncr53c7xx /* which, with 'scsi' are the all 2 files
here */
i obtain:
The driver does not yet support the proc-fs
The board says 53c810 ( but it's a chip with bios and I think it's a
53c815 ).
I used a normal 2.1.6 kernel ( but the problem is the same in very old
kernels).
The proc filesystem is compiled in the kernel and perfeclty running.
I enabled CONFIG_SCSI_NCR53C7xx_sync, CONFIG_SCSI_NCR53C7xx_FAST,
CONFIG_SCSI_NCR53C7xx_DISCONNECT and the driver is not a module (I don't
know what else could be useful for you).
P.S.
I'm not on the kernel mailing list.
-- +-----------------+ | MarcoGhidinelli | +-----------------+