Re: CD-Changer
mab@hamburg.GermanLloyd.de
Fri, 10 Jan 1997 15:27:33 +0100
Roy P. Turner writes:
> On Fri, 10 Jan 1997, Martin Bauer wrote:
>
> > Hi *,
> >
> > I hope this isn't too off-topic.
> >
> > I got a PIONEER DRM-624X cd-changer with 6 cd-magazine. When I
> > boot the machine the kernel reports every slot as a seperate
> > cdrom-drive (/dev/scd0../dev/scd5), ok! But if I try to mount e.g. /dev/scd0, the
> > changer loads the specified CD waits several seconds, unloads
> > the CD and then tells me the following story:
> >
> > # mount -r -t iso9660 /dev/scd0 /cdrom
> > mount: wrong fs type, bad option, bad superblock on /dev/scd0,
> > or too many mounted file systems
> >
>
> I've had similar results with a cdrom changer. In my case, running
> the same mount command again after the error got it to load.
>
> mount -t iso9660 /dev/scd0 /mnt/cdrom (gives an error)
> Run the same command immediately and it mounts fine.
>
Not in my case! I tried it right after the error with the effect, that this
time there was no try to load the CD and the error occured much faster!
Martin
-------------------------------------------------------------------------------
Martin Bauer <mab@hamburg.germanlloyd.de>
Germanischer Lloyd AG, Vorsetzen 32, 20456 Hamburg, Germany
phone/fax: +49-40-36149-564/721
-------------------------------------------------------------------------------