> Unfortuantelly no, this is the program which I was using to play /w
> mouse IRQ's, and I usually was trying it under the "primary" adddress
> range.
Hmmm.
> Here is question, can you try dig out the card, and see if you still can
> get the mouse working w/ 2.0.28 and if so on what irq, address range
> and what kernel cfg and device.
Unfortunately my hardware configuration doesn't allow me to. But when it
was working it was running kernels up to around 2.0.25, maybe .26, with
IRQ 5, primary address, "ATI-XL" driver.
> it should be something like :
>
> 2.0.28
> IRQ 5
> 23Fh (I'll check this one when I get home)
> kernel compiled just w/ BusMouse suppport (only)
> the device C 10, 2 (either inportbm or busmouse)
Hmm. Busmouse thing is interesting. I was using the atixl driver with no
problems. Maybe you should try that one. Device was inportbm though, I
think.
> also even more important, does there shows any message during bootup
> that the mouse was found, something like is for PS/2 mouse.
Yup. Said something like "ATI mouse detected".
TTYL,
Omega
Erik Walthinsen - Programmer, webmaster, 3D artist, etc. __
__ / /\
/ \ omega@sequent.com Work: (503)578-5314 / / \
| | M E G A omega@teleport.com Home: (503)281-4281 / / /\ \
_\ /_ psu12113@odin.cc.pdx.edu Majoring in CS / / /\ \ \
/ /_/__\ \ \
Omega Station: http://www.teleport.com/~omega/ /________\ \ \
Info on Linux, Graphics, Descent, Laptops, etc. \___________\/