--- lx-2.1.25/arch/i386/kernel/time.c Tue Feb 11 09:57:07 1997
+++ linux/arch/i386/kernel/time.c Tue Feb 11 14:32:38 1997
@@ -34,17 +34,17 @@
extern int setup_x86_irq(int, struct irqaction *);
+extern volatile unsigned long lost_ticks;
+
+/* change this if you have some constant time drift */
+#define USECS_PER_JIFFY (1000020/HZ)
+
#ifndef CONFIG_APM /* cycle counter may be unreliable */
/* Cycle counter value at the previous timer interrupt.. */
static struct {
unsigned long low;
unsigned long high;
} init_timer_cc, last_timer_cc;
-
-extern volatile unsigned long lost_ticks;
-
-/* change this if you have some constant time drift */
-#define USECS_PER_JIFFY (1000020/HZ)
static unsigned long do_fast_gettimeoffset(void)
{
and when I get the following error when I try to compile checksum.c:
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O3
-fomit-frame-pointer -pipe -fno-strength-reduce -m486 -malign-loops=2
-malign-jumps=2 -malign-functions=2 -DCPU=586 -c -o checksum.o checksum.c
{standard input}: Assembler messages:
{standard input}:488: Fatal error: Symbol end_of_body already defined.
I seem to have all the required programs to compile the kernel so I don't
think I'm missing anything. I've attached the .config file I'm using below.
-- Matthew Harrell To err is human, Simulation Technology Division, SAIC to purr feline. mharrell@std.saic.com
# # Automatically generated make config: don't edit #
# # Code maturity level options # CONFIG_EXPERIMENTAL=y
# # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KERNELD=y
# # General setup # # CONFIG_MATH_EMULATION is not set CONFIG_NET=y CONFIG_PCI=y CONFIG_PCI_OPTIMIZE=y # CONFIG_MCA is not set CONFIG_SYSVIPC=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_JAVA=m # CONFIG_M386 is not set # CONFIG_M486 is not set CONFIG_M586=y # CONFIG_M686 is not set CONFIG_VIDEO_SELECT=y
# # Floppy, IDE, and other block devices # CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_IDE=y
# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_BLK_DEV_IDESCSI=m CONFIG_BLK_DEV_CMD640=y CONFIG_BLK_DEV_CMD640_ENHANCED=y CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_TRITON=y # CONFIG_IDE_CHIPSETS is not set
# # Additional Block Devices # CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=m CONFIG_MD_STRIPED=m CONFIG_BLK_DEV_RAM=m # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_EZ is not set # CONFIG_BLK_DEV_HD is not set
# # Networking options # # CONFIG_NETLINK is not set CONFIG_FIREWALL=y CONFIG_NET_ALIAS=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_FIREWALL=y # CONFIG_IP_FIREWALL_VERBOSE is not set CONFIG_IP_MASQUERADE=y
# # Protocol-specific masquerading support will be built as modules. # CONFIG_IP_TRANSPARENT_PROXY=y # CONFIG_IP_ALWAYS_DEFRAG is not set # CONFIG_IP_ACCT is not set # CONFIG_IP_ROUTER is not set CONFIG_NET_IPIP=m CONFIG_IP_MROUTE=y CONFIG_IP_ALIAS=m
# # (it is safe to leave these untouched) # # CONFIG_INET_PCTCP is not set CONFIG_INET_RARP=m CONFIG_PATH_MTU_DISCOVERY=y CONFIG_IP_NOSR=y CONFIG_SKB_LARGE=y CONFIG_IPV6=m
# # # CONFIG_IPX=m # CONFIG_IPX_INTERN is not set # CONFIG_IPX_PPROP_ROUTING is not set CONFIG_ATALK=m # CONFIG_IPDDP is not set # CONFIG_AX25 is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_BRIDGE is not set # CONFIG_LLC is not set # CONFIG_WAN_ROUTER is not set
# # SCSI support # CONFIG_SCSI=y
# # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m
# # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set
# # SCSI low-level drivers # # CONFIG_SCSI_7000FASST is not set CONFIG_SCSI_AHA152X=m CONFIG_SCSI_AHA1542=m # CONFIG_SCSI_AHA1740 is not set CONFIG_SCSI_AIC7XXX=y # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_NCR53C7xx=m # CONFIG_SCSI_NCR53C7xx_sync is not set CONFIG_SCSI_NCR53C7xx_FAST=y CONFIG_SCSI_NCR53C7xx_DISCONNECT=y CONFIG_SCSI_NCR53C8XX=m CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE=y CONFIG_SCSI_NCR53C8XX_IOMAPPED=y CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4 CONFIG_SCSI_NCR53C8XX_SYNC=5 CONFIG_SCSI_PPA=m # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set
# # Network device support # CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set CONFIG_DUMMY=m CONFIG_EQUALIZER=m CONFIG_NET_ETHERNET=y CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set CONFIG_EL2=m # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set CONFIG_VORTEX=m # CONFIG_LANCE is not set CONFIG_NET_VENDOR_SMC=y CONFIG_WD80x3=m CONFIG_ULTRA=m # CONFIG_SMC9194 is not set CONFIG_NET_ISA=y # CONFIG_AT1700 is not set # CONFIG_E2100 is not set CONFIG_DEPCA=m CONFIG_EWRK3=m # CONFIG_EEXPRESS is not set # CONFIG_EEXPRESS_PRO is not set # CONFIG_FMV18X is not set # CONFIG_HPLAN_PLUS is not set # CONFIG_HPLAN is not set # CONFIG_HP100 is not set # CONFIG_ETH16I is not set CONFIG_NE2000=m # CONFIG_NI52 is not set # CONFIG_NI65 is not set # CONFIG_SEEQ8005 is not set # CONFIG_SK_G16 is not set # CONFIG_NET_EISA is not set # CONFIG_NET_POCKET is not set # CONFIG_FDDI is not set # CONFIG_DLCI is not set # CONFIG_LTPC is not set CONFIG_PLIP=m CONFIG_PPP=m
# # CCP compressors for PPP are only built as modules. # # CONFIG_NET_RADIO is not set CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_TR is not set CONFIG_SHAPER=m
# # ISDN subsystem # # CONFIG_ISDN is not set
# # CD-ROM drivers (not for SCSI or IDE/ATAPI drives) # # CONFIG_CD_NO_IDESCSI is not set
# # Filesystems # # CONFIG_QUOTA is not set CONFIG_MINIX_FS=m CONFIG_EXT2_FS=y CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_DMSDOS_FS=m CONFIG_DMSDOS_UPON_VFAT=y CONFIG_UMSDOS_FS=m CONFIG_UMSDOS_UPON_DMSDOS=y CONFIG_PROC_FS=y CONFIG_NFS_FS=y # CONFIG_ROOT_NFS is not set CONFIG_SMB_FS=m CONFIG_SMB_WIN95=y CONFIG_NCP_FS=m CONFIG_ISO9660_FS=m CONFIG_HPFS_FS=m CONFIG_SYSV_FS=m # CONFIG_AFFS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_UFS_FS=m CONFIG_BSD_DISKLABEL=y CONFIG_SMD_DISKLABEL=y
# # Character devices # CONFIG_SERIAL=m # CONFIG_DIGI is not set # CONFIG_CYCLADES is not set # CONFIG_STALDRV is not set # CONFIG_RISCOM8 is not set # CONFIG_ESPSERIAL is not set CONFIG_PRINTER=m CONFIG_MOUSE=y # CONFIG_ATIXL_BUSMOUSE is not set # CONFIG_BUSMOUSE is not set # CONFIG_MS_BUSMOUSE is not set CONFIG_PSMOUSE=m # CONFIG_82C710_MOUSE is not set CONFIG_UMISC=y # CONFIG_QIC02_TAPE is not set # CONFIG_FTAPE is not set CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set CONFIG_APM_DO_ENABLE=y CONFIG_APM_CPU_IDLE=y CONFIG_APM_DISPLAY_BLANK=y CONFIG_APM_POWER_OFF=y # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set
# # Sound # CONFIG_SOUND=m # CONFIG_PAS is not set CONFIG_SB=y # CONFIG_ADLIB is not set # CONFIG_GUS is not set # CONFIG_MPU401 is not set # CONFIG_UART6850 is not set # CONFIG_PSS is not set # CONFIG_GUS16 is not set # CONFIG_GUSMAX is not set # CONFIG_MSS is not set # CONFIG_SSCAPE is not set # CONFIG_TRIX is not set # CONFIG_MAD16 is not set # CONFIG_CS4232 is not set # CONFIG_MAUI is not set CONFIG_YM3812=y SBC_BASE=220 SBC_IRQ=7 SBC_DMA=1 SB_DMA2=5 SB_MPU_BASE=0
# # MPU401 IRQ is only required with Jazz16, SM Wave and ESS1688. #
# # Enter -1 to the following question if you have something else such as SB16/32. # SB_MPU_IRQ=-1 # CONFIG_LOWLEVEL_SOUND is not set
# # Kernel hacking # # CONFIG_PROFILE is not set