I am running 2.1.26 on a 486DX2/66. I have a no-name NE2000 compatible,
using the ATLANTIC chipset. My ethernet card is now showing up as a netrom
device. Below is the output from arp:
[root@sara djweis]# /sbin/arp -an
Address HWtype HWaddress Flags Mask Iface
192.168.5.10 netrom 00:00:00:00:00:00 MP * *
The card is detected okay at boot, and it worked in 2.0.x just fine.
ne.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
NE*000 ethercard probe at 0x300: 00 c0 7c 00 33 72
eth0: NE2000 found at 0x300, using IRQ 11.
According to the setup utility, this is the correct address. Any
suggestions?
djweis
David Weis
weisd3458@uni.edu